problem

  1. M

    i210AT NIC not recognized on Dell Wyse Zx0

    I've been trying to get OPNSense running on my Dell Wyse Zx0 (7010) and I have been completely unable to get the Mini PCI-e i210AT NIC working in the setup. Not sure if the NIC is a dud, if it's just incompatible with the Zx0, if the Mini PCI-e slot is broken on the Zx0 or some other reason...
  2. M

    Topton Motherboard No SATA drives found

    Hello everyone, I recently bought a Topton Motherboard with the N5105 in it. I used to have an old NAS running TrueNAS Core with 3x HDDs (Data drives) and 1x SSD as a boot drive and I wanted to move it to a more power efficient setup. My issue: I can't figure out why none of my Storage is...
  3. S

    Supermicro H12SSL-CT Boot (0x62) and BIOS update Problem.

    Hehey Folks Ok i come directly to my situation. What's the HW: Mainboard: Supermicro H12SSL-CT ( REV: 1.01 ) CPU: AMD EPYC 7232P RAM: 2x Samsung 8G 2Rx8 PC4-2133P-RE0-10-MB1 ( M393A1G43DB0-CPB2Q S ) If i put all power cables on ( both cpu and the big 24 pin) the POST stops at: DXE--USB...
  4. B

    [Solved ]Supermicro X9DBU-iF and 10G PCI-e NIC detection

    Case was solved by adding a second CPU. --- Hi, I own a Supermicro X9DBU-iF board (up-to-date BMC/BIOS) with a rsc-r1uu-ue16 riser. I am trying to make it detect an Intel XL710-BM1 Quad-Port 10G SFP+ PCIe 3.0 x8 NIC and/or an Intel 82599ES Dual-Port 10G SFP+ PCIe 2.0 x8 (up to date firmware)...
  5. F

    No Users Showing up after leaving windows domain

    I was tinkering around with windows server 2016 essentials and from my Windows 10 Pro workstation I connected to the domain I made, once I left the domain windows 10 no longer shows the last account logged in on the login screen.
  6. 3

    Linux-Bench Error

    Sorry if I'm messing something up, but I'm having problems with Linux-Bench. I originally tried running under Ubuntu-Gnome 16.04 since that is what our office uses and it is the latest LTS. I couldn't get curl to install with the code on the website... I kept getting errors along the lines of...