EU Huawei RH2288H V3 (ddr4/v4) full fronts 187€

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
C

Cruzader

Well-Known Member
Jan 1, 2021
656
657
93
Jannis Jacobsen said:
Have you found anywhere to get supported ram at a good price?

-j
Click to expand...
The 2666 ram compatability the scalable cpus are listed with is up to 2666, so on a budget you can reuse the same 2133p as with v3/v4 cpus in the v3 model servers.
The xeon 6133 20core/40thread cpus also work in them btw (OEM version of 6138).

Looks like you are also in Norway, then finn tends to be cheaper than getting from ebay.
Most of the sellers wanting 400-550kr for 32gb sticks will accept 250-320kr area if you are getting a stack.
I just got 46x 32gb 2666 in the mail today that i paid 280kr per stick for (24€ or 25.8$ if anybody outside Norway is wondering).
 
J

Jannis Jacobsen

Active Member
Mar 19, 2016
367
80
28
46
Norway
Cruzader said:
The 2666 ram compatability the scalable cpus are listed with is up to 2666, so on a budget you can reuse the same 2133p as with v3/v4 cpus in the v3 model servers.
The xeon 6133 20core/40thread cpus also work in them btw (OEM version of 6138).

Looks like you are also in Norway, then finn tends to be cheaper than getting from ebay.
Most of the sellers wanting 400-550kr for 32gb sticks will accept 250-320kr area if you are getting a stack.
I just got 46x 32gb 2666 in the mail today that i paid 280kr per stick for (24€ or 25.8$ if anybody outside Norway is wondering).
Click to expand...
Do you know if the eller you used on finn has any more ram modules?
Do you have the finn code?

-j
 
I

IBaaNB

New Member
Jun 5, 2024
3
0
1
grenskul said:
Consumer yes. 3090 no. I've ran 2070s and 3060s. Made the GPU power cables myself cause I'm cheap. They increase the fan speed but mine is manual so that wasn't an issue.
Click to expand...
How to connect 2 GPU I've planned to add 2 x 4060.
 
Last edited:
I

IBaaNB

New Member
Jun 5, 2024
3
0
1
I want to add 2 GTX4060, but I'm afraid it will not fit in Rh2288h v3.
Can I see an image of 2 GPU setups if someone has one?
And do I have to buy another riser card?
Is it going to get throttled down?
 
Y

Your name or

Active Member
Feb 18, 2020
302
43
28
depend what Version you get in mine where a Riser Card where you can put in 2x 2 PCI-E Slot hights Cards. There is no Cable with the Server and you need some. Where you get them from I dont know. Maybe from Aliexpress.
IBaaNB said:
Is it going to get throttled down?
Click to expand...
I would say it depend how hot the Input Temperature will be.
 
  • Like
Reactions: IBaaNB
C

Cruzader

Well-Known Member
Jan 1, 2021
656
657
93
If you get a unit with both risers as the full length version you can fit a 4060 in each of them (still need to source the power cables tho).
They officialy support grid/tesla cards that are longer than the 4060.

But ive bought alot of the rh2288h v3 models for resale and its not a given that you actualy get 2x full length riser cages.
The last stacks i bought was a mix between 2full, 2half, 1full+1half and a few with even just 1half.
1f1h.jpg

In my experience they ship the huaweis with
- 2288 v3 2.5", 750w
- 2288 v3 3.5", 460w
- 5288 v3 3.5", 1200w
- 2288 v5 2.5", 1500w

So you should be fine on wattage aslong as not going with the 460w one.
 
  • Like
Reactions: IBaaNB
X

Xeroxxx

Member
Mar 12, 2020
99
67
18
I've one P40 and P100 running in my RH2288Hv3, ordered an addional risercard and upgraded the power supplys to 1200W each.

However you've to tape/mark pin B30 on your gpu to dodge the hardware power brake for gpus not on the HCL, may apply for your 4060 aswell.

NVIDIA Tesla GPU - Pow... | IsUnreal. Wiki

nvidia-smi -q | grep HW HW Slowdown : Active HW Thermal...
wiki.isunreal.de wiki.isunreal.de
 
Last edited:
  • Like
Reactions: IBaaNB
I

IBaaNB

New Member
Jun 5, 2024
3
0
1
Xeroxxx said:
I've one P40 and P100 running in my RH2288Hv3, ordered an addional risercard and upgraded the power supplys to 1200W each.

However you've to tape/mark pin B30 on your gpu to dodge the hardware power brake for gpus not on the HCL, may apply for your 4060 aswell.

NVIDIA Tesla GPU - Pow... | IsUnreal. Wiki

nvidia-smi -q | grep HW HW Slowdown : Active HW Thermal...
wiki.isunreal.de wiki.isunreal.de
Click to expand...
I see because of pin B30, that's why I don't see 4060 going beyond 60% utilization.
What power supply I should get Huawei or other brands also work?
I plan to add 3090 if tape pin B30 can fix the power throttle problem.
1718817868416.png
 

Attachments

Y

Your name or

Active Member
Feb 18, 2020
302
43
28
Some People claim that HP maybe work. I want buy some addional to if someone find a good source for genueen "replacements".
 
  • Like
Reactions: IBaaNB
M

MikeTomlin

New Member
Dec 23, 2023
11
2
3
Switzerland
did anybody ever tried to replace the fans with other typs which arent that loud?
I know that there is this script to change the fan speed, but thats only going to increase the temperature.
I was wondering if there are any other compantible fans which would fit and have the same kind of performance but just beeing not so noisy.
 
X

Xeroxxx

Member
Mar 12, 2020
99
67
18
Never tried to replace. This seems to be custom fit to me so no alternatives.

However whats your temperature issue? I run at 32% without the CPUs barely going above 50 degrees under full load.

You will wonder how quite those huawei servers are compared to others screaming in your face.
 
SecCon

SecCon

Arkham Asylum Server Mgmt
May 26, 2022
291
65
28
@MikeTomlin
My cpus are hardly ever over 50C and default fans.

1719659805381.png

I do not really have a tool to measure noise levels, but I could probably have the server in the living room instead of the basement without any issues. They only peak a bit when the server restarts.
 
You must log in or register to reply here.
Top Bottom