HP T610 can't get anywhere near 1Gb/s on iPerf3

Discussion in 'Networking' started by fossxplorer, Feb 10, 2019.

  1. fossxplorer

    fossxplorer Active Member

    Joined:
    Mar 17, 2016
    Messages:
    408
    Likes Received:
    45
    Hi owners of HP T610 (non-plus version with AMD G-T56U),
    today i was kinda surprised to see that i can only achieve ~450Mb/s using iperf/3 on the RX, although TX seems fine with ~ 930/940Mb/s.
    I did this testing after finding out that the thin client box had a freeze during a boot and achieved a very high temperature unfortunately to be discovered very late (~24h). I've also connected another Realtek USB3 Gbit adapter to get ~550Mb/s on the RX.

    Can anyone else with T610 test the network speed and share their findings with me?

    Thanks.
     
    #1
  2. aero

    aero Active Member

    Joined:
    Apr 27, 2016
    Messages:
    309
    Likes Received:
    51
    Have you checked any of the offload settings of the nic? How about with multiple iperf streams (-P x)?
     
    #2
Similar Threads: T610 can't
Forum Title Date
Networking cx455a can't change guid and mac Oct 28, 2019
Networking [SOLVED]Mellanox ConnectX 3 can't get 40G only 10G Nov 16, 2018
Networking Arista DCS-7050QX-32S, 4-SFP+ ports - can't configure Sep 15, 2018
Networking Can't get 10Gbit speeds on Intel X550-T1 Jul 3, 2018
Networking Juniper EX-2500 - can't bring up 1GBPS link? Feb 19, 2018

Share This Page