Hi,
I've been doing some research and reading up on flashing a LSI raid card into IT mode. Mainly from the link here: How-to Flash Supermicro X8SI6-F LSI SAS 2008 Controller with LSI IT Firmware Guide
And I also read that it was pretty popular among the FreeNAS community to use a M1015 and crossflash it to LSI 9211 with IT firmware. Unfortunately, I have a LSI 9271 Dell OEM and wanted to know if the same can be achieved with this particular model.
I plan to crossflash the card with 9211's "Package_P20_Firmware_BIOS_for_MSDOS_Windows" from the LSI website through efi or cmd.
I'm pretty new/noob when it comes to raids and HBAs and hope that someone on this forum can lead me to the right direction.
Many Thanks!
I've been doing some research and reading up on flashing a LSI raid card into IT mode. Mainly from the link here: How-to Flash Supermicro X8SI6-F LSI SAS 2008 Controller with LSI IT Firmware Guide
And I also read that it was pretty popular among the FreeNAS community to use a M1015 and crossflash it to LSI 9211 with IT firmware. Unfortunately, I have a LSI 9271 Dell OEM and wanted to know if the same can be achieved with this particular model.
I plan to crossflash the card with 9211's "Package_P20_Firmware_BIOS_for_MSDOS_Windows" from the LSI website through efi or cmd.
I'm pretty new/noob when it comes to raids and HBAs and hope that someone on this forum can lead me to the right direction.
Many Thanks!