Hasivo S1100WP-8GT-SE firmware

[aravot]

Hello,

Few months ago I purchased Hasivo S1100WP-8GT-SE, every time I change the IP address type to dynamic it reverts back to the default static IP, I have emailed Hasivo asking if there is a newer firmware that solves this issue but no response.

Anyone here using S1100WP-8GT-SE that has newer firmware if so could you please share the firmware or able to get response from Hasivo can request for a newer firmware.

My device version is.
Loader Version HS_3.6.6.55087
Loader Date Dec 11 2021
Firmware Version HS_1.0.0.0
Firmware Date Apr 22 2023




Thank you.

 

[blunden]

I have a different Hasivo switch using the same management UI. Some of the buttons (like the save and logout button) gets hidden if your browser window isn't wide enough. Also, there is a menu option to copy the running config to the boot config (or something like that) which you could try.

If nothing else works, my unit also had a hidden menu where you can change the default factory config. If you end up needing it, I'll dig it up again for you from my old posts in this forum.

In general, I've found that you can contact them on AliExpress and they'll send you the updated firmware if there is one.

 

[aravot]

Thank you for the reply, I don't have issue with the save, logout and other buttons I do see these buttons. I will probably sale the switch and buy branded switch.

I did contact on AliExpress and the email posted on their website, no reply.
This is the problem with Chinese brand switches and other products they have no after sale support.

 

[blunden]

Thank you for the reply, I don't have issue with the save, logout and other buttons I do see these buttons. I will probably sale the switch and buy branded switch.

I did contact on AliExpress and the email posted on their website, no reply.
This is the problem with Chinese brand switches and other products they have no after sale support.

The quality of the management interface you get seem to be based on the switch chip generation. The slightly newer models have a different management UI, potentially with slightly fewer features (not sure) but seemingly fewer bugs.

If you want to try modify the IP by changing the default factory setting, you can check my old post linked below:

https://forums.servethehome.com/index.php?threads/hasivo-s600wp-5gt-2s.40261/post-394328

You could also try changing it using the telnet CLI (SSH is broken on my switch's firmware).

I see. They replied to me rather quickly when I asked on AliExpress, and I bought my switch several months ago.

 

[Arekx]

For S1100WP-8GT-1XGT-SE there was firmware from sep 2023 . No idea if they run the same firmware on various S1100 models.

Loader Version	HS_3.6.6.55087
Loader Date	Nov 13 2022 - 14:37:31
Firmware Version	HS_1.0.0.0
Firmware Date	Sep 16 2023 - 17:02:53

Anyway hasivo@hasivo.com in april 2024 replied (in 1 day) that there was no newer firmware (for S1100WP-8GT-1XGT-SE) at that point. You could ask them using this email to see how things look like for your model.

 

[FourierT]

Hello,

Few months ago I purchased Hasivo S1100WP-8GT-SE, every time I change the IP address type to dynamic it reverts back to the default static IP, I have emailed Hasivo asking if there is a newer firmware that solves this issue but no response.

Anyone here using S1100WP-8GT-SE that has newer firmware if so could you please share the firmware or able to get response from Hasivo can request for a newer firmware.

My device version is.
Loader Version HS_3.6.6.55087
Loader Date Dec 11 2021
Firmware Version HS_1.0.0.0
Firmware Date Apr 22 2023


View attachment 34085

Thank you.

I have the same switch which I bought from watching the STH review. I also have the same problem with the switch not saving the settings... Except I want a static IP address, but a different subnet from the default IP address, but after I change it, it works for a couple of weeks then all of a sudden, I can't access the web login. The only way I get the login back is if I reset the switch. Any news on a newer firmware?

 

[blunden]

I have the same switch which I bought from watching the STH review. I also have the same problem with the switch not saving the settings... Except I want a static IP address, but a different subnet from the default IP address, but after I change it, it works for a couple of weeks then all of a sudden, I can't access the web login. The only way I get the login back is if I reset the switch. Any news on a newer firmware?

Did you make sure to actually write the change to flash by saving it? If you want to be sure, you can use the CLI to see both the running config (only stored in RAM) and the startup config (stored in flash).

If that doesn't work, you can usually modify the default factory configuration on these switches using hidden menus. Exactly what the menu is called varies a bit based on the version of the management interface. Look at my post above for one example.

 

[FourierT]

Did you make sure to actually write the change to flash by saving it? If you want to be sure, you can use the CLI to see both the running config (only stored in RAM) and the startup config (stored in flash).

If that doesn't work, you can usually modify the default factory configuration on these switches using hidden menus. Exactly what the menu is called varies a bit based on the version of the management interface. Look at my post above for one example.

It definitely saved because it works for a couple of weeks at the new subnet address. I also added the new ip address to static mapping in OPNSense just to make sure nothing else can take the address. After a couple of weeks, when I go to the web management ip address, it just times out.

I haven't had the time to see if I could modify the factory default since I got so sick and tired of factory resetting the switch that I just let it run as a dumb non-managed switch, but obviously I want to get what I paid for. I'll try changing the factory defaults next time I factory reset the switch so I can log into the web management again. I'm just wondering if anyone else has the same problem and if they had a new firmware for it. I have the non-poe version of the switch which honestly makes me want to either stay away from Hasvio or ponied up for the POE version since more people seems to use that version.

 

[blunden]

It definitely saved because it works for a couple of weeks at the new subnet address. I also added the new ip address to static mapping in OPNSense just to make sure nothing else can take the address. After a couple of weeks, when I go to the web management ip address, it just times out.

I haven't had the time to see if I could modify the factory default since I got so sick and tired of factory resetting the switch that I just let it run as a dumb non-managed switch, but obviously I want to get what I paid for. I'll try changing the factory defaults next time I factory reset the switch so I can log into the web management again. I'm just wondering if anyone else has the same problem and if they had a new firmware for it. I have the non-poe version of the switch which honestly makes me want to either stay away from Hasvio or ponied up for the POE version since more people seems to use that version.

Oh, that is a pretty important detail. Weird.

Yeah, I'd also be interested to know if this is a widespread issue or just an issue with your unit.