My cisco branded ssd has part '5491-72337-1600G'.@gtech1
I have the 1605gb version of CISCO SSD.
I follow nerdalertdk post in
https://forums.servethehome.com/index.php?threads/sandisk-px600-cisco-pcie-ssd.24167/page-2
replace the part number with your part number when you add the entries in the INFO file
Added: you would not find your part number in the INFO file , you need to add your part number entries in the INFO file
There are different sections in INFO file.PN is [549172337]
You won't find [549172337] in the INFO file.
You need to add a new section PN [549172337] ,
copy and paste from other section.
Thank you.There are 2 sections related to [5491-72337] in the file.
The firmware file that I made is 23MB.
I could email it to you.
UEFI Option ROM v4.3.4, rev 977 Disabled
[549172371]
version = 8.9.9.118194
file = gen3_tangerine_fusion_8.9.9.118194.bin
format = bin
ecc = 11b
cntrpdiversion = 0.0.44
cntrpdifile = venturi_0.0.44.pdi
cntrpdiformat = pdi
nce = 1f80000
nceversion = 1.0.9.100764
ncefile = nce_1.0.9.100764.bin
errfw = 1f80000
errfwversion = 0.0.3
errfwfile = errfw_0.0.3.bin
optrom = 3c00000
optromversion = 4.3.7.1205
optromfile = uefi-noboot-3002_4.3.7.1205.rom
You have to power cycle the device to have the update take effect. Need a cold reboot.question about optromversion , mod 4.3.7 firmware add [5491-72371] [549172371] for HPE version sx350, upgrade firmware success ,but fio-status -a still show old version
but in 4.3.7 firmware my mod info isCode:UEFI Option ROM v4.3.4, rev 977 Disabled
I tried update firmware again with -f paramter , but still show old UEFI Option ROM version?Code:[549172371] version = 8.9.9.118194 file = gen3_tangerine_fusion_8.9.9.118194.bin format = bin ecc = 11b cntrpdiversion = 0.0.44 cntrpdifile = venturi_0.0.44.pdi cntrpdiformat = pdi nce = 1f80000 nceversion = 1.0.9.100764 ncefile = nce_1.0.9.100764.bin errfw = 1f80000 errfwversion = 0.0.3 errfwfile = errfw_0.0.3.bin optrom = 3c00000 optromversion = 4.3.7.1205 optromfile = uefi-noboot-3002_4.3.7.1205.rom
so the questions are
1 why UEFI Option ROM not upgrade ?
2 is old UEFI Option ROM harmful?
no luck , today power cycle server ,but still show old version UEFI Option ROMYou have to power cycle the device to have the update take effect. Need a cold reboot.
ioMemory Adapter Controller, PN:833585-001
Microcode Versions: App:0.0.44.0
Powerloss protection: protected
PCI:04:00.0, Slot Number:4
Vendor:1aed, Device:3002, Sub vendor:1590, Sub device:da
Firmware v8.9.9, rev 20200113 Public
UEFI Option ROM v4.3.4, rev 977 Disabled
1600.00 GBytes device size
Format: v501, 390625000 sectors of 4096 bytes
PCIe slot available power: 75.00W
PCIe negotiated link: 8 lanes at 5.0 Gt/sec each, 4000.00 MBytes/sec total
Internal temperature: 50.69 degC, max 55.12 degC
Internal voltage: avg 1.01V, max 1.01V
Aux voltage: avg 1.80V, max 1.80V
Reserve space status: Healthy; Reserves: 100.00%, warn at 10.00%
Active media: 100.00%
Rated PBW: 5.50 PB, 100.00% remaining
Your drive is OEM / branded by IBM. And the firmware package you're trying to use lacks IBM firmware.Error: Firmware file does not contain firmware for device '/dev/fct0', part 'PA005878119'
I've tried adding the part number in the INFO as mentioned however that returns
Error: Device '/dev/fct0' had an error while updating. This device does not support firmware update.
Anyone have an idea whats happening here?
Thanks for the quick response......I'll check IBM support for the correct firmware package.Your drive is OEM / branded by IBM. And the firmware package you're trying to use lacks IBM firmware.
Your best option is to download correct IBM firmware package (I think it's free for all registered users).
Second and error-prone option is to construct PA005878119 section (using correct source section, and I don't know what exact section it should be) in Fusion-IO INFO file to cross-flash it with Fusion-IO firmware.
In case of IBM its easier to go with OEM firmware package.
Hmm, I think I was wrong (mistaken by that extra long serial number): "ioMemory SX300-3200, Product Number:FJYYT", and FJYYT applies to Dell part number, so you'll possibly need to get Dell package instead of IBM.Thanks for the quick response......I'll check IBM support for the correct firmware package.
lspci -s 08:00.0 -vnn
Dell firmware installed with no issue...thanks againYes, indeed, for Dell you'll need to go directly here:
Fusion ioMemory Support Downloads :: SanDisk
dell.fusionio.com
Select your drive, OS and download .fff file. Currently it works just fine.
For some reason their front-facing website is broken.