Hello,
I bought 2*640GB MLC ioDrive (AP1-004-640-CS-0001) and I want to setup them into DL360P G8 server. I download a firmware from HP website (below URL) but I received the following error:
Error: Firmware file does not contain firmware for device 'fct0', part '00377700201'
command : fio-status -a
result:
Adapter: Single Adapter
APPLE-MOBILEME IODRIVE 640GB MLC, Product Number:AP1-004-640-CS, SN:482109
Pseudo Low-Profile ioDIMM Adapter, PN:00119200000
External Power: NOT connected
PCIe Bus voltage: min 11.96V max 12.17V
PCIe Bus current: max 0.46A
PCIe Bus power: max 5.59W
PCIe Power limit threshold: 24.75W
PCIe slot available power: unavailable
Connected ioMemory modules:
fct0: Product Number:AP1-004-640-CS, SN:482109
fct0 Status unknown: Driver is in MINIMAL MODE:
The firmware on this device is not compatible with the currently installed version of the driver
ioDrive 640GB, Product Number:AP1-004-640-CS, SN:482109
!! ---> There are active errors or warnings on this device! Read below for details.
ioDrive 640GB, PN:00377700201
Powerloss protection: not available
PCI:04:00.0
Vendor:1aed, Device:1005, Sub vendor:1aed, Sub device:1010
Firmware v5.0.6, rev 101583 Public
Geometry and capacity information not available.
Format: not low-level formatted
PCIe slot available power: unavailable
PCIe negotiated link: 4 lanes at 2.5 Gt/sec each, 1000.00 MBytes/sec total
Internal temperature: 45.77 degC, max 46.26 degC
Internal voltage: avg 1.01V, max 2.38V
Aux voltage: avg 2.47V, max 2.38V
Rated PBW: 10.00 PB
Lifetime data volumes:
Physical bytes written: 0
Physical bytes read : 0
RAM usage:
Current: 0 bytes
Peak : 0 bytes
ACTIVE WARNINGS:
The ioMemory is currently running in a minimal state.
Thanks