You're on the current firmware, just need to upgrade to the latest driver.Here:
Found 1 ioMemory device in this system
Driver version: 3.2.8 build 1350
Adapter: Single Controller Adapter
IBM 1.20TB High IOPS MLC Mono Adapter, Product Number:00D8407, SN:
ioDrive2 Adapter Controller, PN:90Y4378
External Power: NOT connected
PCIe Bus voltage: avg 11.79V
PCIe Bus current: avg 0.76A
PCIe Bus power: avg 9.05W
PCIe Power limit threshold: 24.75W
PCIe slot available power: unavailable
Connected ioMemory modules:
fct0: Product Number:00D8407, SN:1310D07BF
fct0 Attached
ioDrive2 Adapter Controller, Product Number:00D8407, SN:
ioDrive2 Adapter Controller, PN:90Y4378
SMP(AVR) Versions: App Version: 1.0.34.0, Boot Version: 0.0.9.1
Located in slot 0 Center of ioDrive2 Adapter Controller SN:
Powerloss protection: protected
PCI:01:00.0
Vendor:1aed, Device:2001, Sub vendor:1014, Sub device:432
Firmware v7.1.17, rev 116786 Public
1205.00 GBytes device size
Format: v500, 2353515625 sectors of 512 bytes
PCIe slot available power: 75.00W
PCIe negotiated link: 4 lanes at 5.0 Gt/sec each, 2000.00 MBytes/sec total
Internal temperature: 56.11 degC, max 56.60 degC
Internal voltage: avg 1.02V, max 1.02V
Aux voltage: avg 2.48V, max 2.49V
Reserve space status: Healthy; Reserves: 100.00%, warn at 10.00%
Active media: 100.00%
Rated PBW: 17.00 PB, 99.99% remaining
Lifetime data volumes:
Physical bytes written: 1,736,309,032,040
Physical bytes read : 3,650,579,529,400
RAM usage:
Current: 400,498,560 bytes
Peak : 403,668,480 bytes
Contained VSUs:
fct0: ID:0, UUID:73e41e32-3b72-451d-b7f7-35d37ebf0322
fct0 State: Online, Type: block device
ID:0, UUID:73e41e32-3b72-451d-b7f7-35d37ebf0322
1205.00 GBytes device size
Format: 2353515625 sectors of 512 bytes
The easiest way to do that without creating an account is via: SanDisk Dell Support
Just put in your product, os, then download the latest 3.2.14 driver.
Sent from my XT1650 using Tapatalk