i can't find how to update firmware on my fujitsu p3700 800gb
intel's "isdct" tool refused to do that.
actually the problem is that when i run "hdparm -Tt /dev/nvme0n1" i got only around 1500-1900mb/s read speed. that's pretty low, especially compared to my other genuine intel p3700 400gb, which shows 2700-2800mb/s using the same command.
and i wonder what is the problem. both were tested on exactly the same system.
sata controller was disabled, pci-e slot was manually set to v3.0 in mainboard's bios.
it is looks like i got a pci-e 2.0 limit (4x 500mb/s=2000mb/s).
but, again, i have no limits when i use 400gb full-height pci-e card.
this p3700 2.5" connected via funtin adapter (first version without the vent hole).
maybe that is the problem too?
here's the full info:
clearly states "PCILinkGenSpeed : 3".
so maybe that's not the case and i just need to update the firmware or just change funtin adapter to something else?
is it possible to replace firmware to intel's one?
intel's "isdct" tool refused to do that.
actually the problem is that when i run "hdparm -Tt /dev/nvme0n1" i got only around 1500-1900mb/s read speed. that's pretty low, especially compared to my other genuine intel p3700 400gb, which shows 2700-2800mb/s using the same command.
and i wonder what is the problem. both were tested on exactly the same system.
sata controller was disabled, pci-e slot was manually set to v3.0 in mainboard's bios.
it is looks like i got a pci-e 2.0 limit (4x 500mb/s=2000mb/s).
but, again, i have no limits when i use 400gb full-height pci-e card.
this p3700 2.5" connected via funtin adapter (first version without the vent hole).
maybe that is the problem too?
here's the full info:
Code:
isdct show -all -intelssd
- Intel SSD DC P3700 Series CVFT4526000U800HGN -
AggregationThreshold : 0
AggregationTime : 0
ArbitrationBurst : 0
Bootloader : 8B1B0129
CoalescingDisable : 0
DevicePath : /dev/nvme0n1
DeviceStatus : Healthy
EndToEndDataProtCapabilities : 17
EnduranceAnalyzer : Media Workload Indicators have reset values. Run 60+ minute workload prior to ru
ErrorString :
Firmware : 8000FJP2
FirmwareUpdateAvailable : Please contact your Intel representative about firmware update for this dr
HighPriorityWeightArbitration : 0
IOCompletionQueuesRequested : 30
IOSubmissionQueuesRequested : 30
Index : 0
Intel : True
IntelGen3SATA : False
IntelNVMe : True
InterruptVector : 0
LBAFormat : 0
LatencyTrackingEnabled : NVMe command reported a problem.
LowPriorityWeightArbitration : 0
MaximumLBA : 1562824367
MediumPriorityWeightArbitration : 0
MetadataSetting : 0
ModelNumber : INTEL SSDPE2MD800G4C
NVME_1_0_Supported : True
NVME_1_2_Supported : False
NVMeControllerID : 0
NVMePowerState : 0
NamespaceId : 1
NativeMaxLBA : 1562824367
NumErrorLogPageEntries : 63
NumLBAFormats : 6
OEM : Fujitsu
PCILinkGenSpeed : 3
PCILinkWidth : 4
PowerGovernorMode : 0 25W
Product : Fultondale
ProductFamily : Intel SSD DC P3700 Series
ProductProtocol : NVME
ProtectionInformation : 0
ProtectionInformationLocation : 0
SMARTHealthCriticalWarningsConfiguration : 0
SMBusAddress : NVMe command reported a problem.
SectorSize : 512
SerialNumber : CVFT4526000U800HGN
TCGSupported : False
TempThreshold : 85
TimeLimitedErrorRecovery : 0
TrimSupported : True
VolatileWriteCacheEnabled : False
WriteAtomicityDisableNormal : 0so maybe that's not the case and i just need to update the firmware or just change funtin adapter to something else?
is it possible to replace firmware to intel's one?
