$150 - QNAP-QM2-2P10G1TB
Comes with the flat and half hight backing plate, but not the the full hight backing plate. I bought a backing plate for another model that would just take a little dremel action to get it to fit.
$425 - KCD6XLUL7T68 ($800 for both) - SIE version firmware at 8003
The drives are great but in my Asrock Rack ROMED8-2T they throw AER error and fill the log file in only a few hours.
21:56:43 kernel: {51610}[Hardware Error]: bridge: secondary_status:
0x0000, control: 0x0000
21:56:38 kernel: nvme 0000:c1:00.0: AER: aer_layer=Physical Layer,
aer_agent=Receiver ID
21:56:38 kernel: {51609}[Hardware Error]: bridge: secondary_status:
0x0000, control: 0x0000
21:56:33 kernel: nvme 0000:46:00.0: AER: aer_layer=Physical Layer,
aer_agent=Receiver ID
If I could get a newer firmware (currently 8003) and if that fixed the issue I would keep them
I have Zelle and Venmo and I'll cover shipping via USPS
Pictures available on request
Comes with the flat and half hight backing plate, but not the the full hight backing plate. I bought a backing plate for another model that would just take a little dremel action to get it to fit.
$425 - KCD6XLUL7T68 ($800 for both) - SIE version firmware at 8003
The drives are great but in my Asrock Rack ROMED8-2T they throw AER error and fill the log file in only a few hours.
21:56:43 kernel: {51610}[Hardware Error]: bridge: secondary_status:
0x0000, control: 0x0000
21:56:38 kernel: nvme 0000:c1:00.0: AER: aer_layer=Physical Layer,
aer_agent=Receiver ID
21:56:38 kernel: {51609}[Hardware Error]: bridge: secondary_status:
0x0000, control: 0x0000
21:56:33 kernel: nvme 0000:46:00.0: AER: aer_layer=Physical Layer,
aer_agent=Receiver ID
If I could get a newer firmware (currently 8003) and if that fixed the issue I would keep them
I have Zelle and Venmo and I'll cover shipping via USPS
Pictures available on request