It's been a minute or two but in my old posts you'll see I used to sell here quite a bit. After a long hiatus I've been updating my homelab to augment what I can access at work or via vendors. So far so good but now I'm looking to do some much needed Spring cleaning.
I'm starting with DC NVMe U.2 SSDs today, but over the next few days I plan to add DDR4 RDIMMs/LRDIMMs, Supermicro X10SDV/X11SDV boards & systems, and a few other items.
I think these prices are good compared to eBay & elsewhere, but let me know if you see better prices or want buy multiple items and I'll deal.
Paypal/Venmo/Zelle accepted. CONUS shipping destinations only. Buyer pays shipping. Thanks for looking!
2025-03-04:
SOLD2x SSDPE21D015TAX1 - Intel Optane 905P 1.5TB PCIE 3.0 x4 U.2 2.5" 15mm NVMe SSDs - $300 each
SOLD4x SSDPF2KE032T9E - Dell (Intel/Solidigm) D7-P5600 3.2TB PCIe 4.0 x4 U.2 2.5" 15mm NVMe SSDs - $250 each
2025-03-05: these have been rock solid for me for years but I'm replacing 10GBASE-T with Twinax/DAC for "basic high speed" connections.
1x Supermicro X10SDV-4C-TLN2F with I/O shield, OOB license, & 4x Samsung M393A2G40DB0-CPB 16GB DDR4 2133MHz RDIMMs - $325
SOLD1x Netgear XS716T 16x10GBASE-T switch - $180
The X10SDV was my primary NAS with an 8x8TB HDD ZFS pool (via LSI 2308-8i HBA). It's the D-1520 launch version that doesn't officially support SR-IOV. SR-IOV *is* enabled in current BIOS but I'm not sure I'd trust that if you're wanting to do an all-in-one platform with a NAS VM directly accessing the hardware.
Nowadays l'd recommend using the onboard SATA for 4-6 higher capacity HDDs, and leverage the PCIe3 x16 slot for 4x NVMe SSDs via 4x4x4x4 bifurcation, but I can throw in the HBA with two short 4xSATA breakout cables if preferred.
2025-03-07:
SOLD1x X11SDV-8C-TP8F 5019D-FN8TP system w/ 256GB RAM (4x M386A8K40BM2-CTD), OOB license, & PCIE 3 x16 riser - $680
2x 1x X11SDV-8C-TP8F motherboards with OOB licenses, 2x SM SATA cables & standard I/O shields - $475 (1 SOLD, 1 LEFT)
2025-03-08: Selling these RDIMMs in batches of 4. Will be shipped in ESD clamshell packaging.
SOLD4x M393A4K40CB2-CTD Samsung 32GB DDR4 2666MHz RDIMMs - $75 TOTAL
SOLD4x M393A2G40DB0-CPB 16GB DDR4 2133MHz RDIMMs - $35 TOTAL
SOLD4x M393A2G40DB0-CPB 16GB DDR4 2133MHz RDIMMs - $35 TOTAL
I'm starting with DC NVMe U.2 SSDs today, but over the next few days I plan to add DDR4 RDIMMs/LRDIMMs, Supermicro X10SDV/X11SDV boards & systems, and a few other items.
I think these prices are good compared to eBay & elsewhere, but let me know if you see better prices or want buy multiple items and I'll deal.
Paypal/Venmo/Zelle accepted. CONUS shipping destinations only. Buyer pays shipping. Thanks for looking!
2025-03-04:
SOLD
SOLD
2025-03-05: these have been rock solid for me for years but I'm replacing 10GBASE-T with Twinax/DAC for "basic high speed" connections.
1x Supermicro X10SDV-4C-TLN2F with I/O shield, OOB license, & 4x Samsung M393A2G40DB0-CPB 16GB DDR4 2133MHz RDIMMs - $325
SOLD
The X10SDV was my primary NAS with an 8x8TB HDD ZFS pool (via LSI 2308-8i HBA). It's the D-1520 launch version that doesn't officially support SR-IOV. SR-IOV *is* enabled in current BIOS but I'm not sure I'd trust that if you're wanting to do an all-in-one platform with a NAS VM directly accessing the hardware.
Nowadays l'd recommend using the onboard SATA for 4-6 higher capacity HDDs, and leverage the PCIe3 x16 slot for 4x NVMe SSDs via 4x4x4x4 bifurcation, but I can throw in the HBA with two short 4xSATA breakout cables if preferred.
2025-03-07:
SOLD
2025-03-08: Selling these RDIMMs in batches of 4. Will be shipped in ESD clamshell packaging.
SOLD
SOLD
SOLD
Last edited:
