i thought of that, but then the PCI bracket was stripped off too... is that common to do with water cooled?maybe for a water cooled infra
I'm thinking about liquid cooling 1080 Ti/'s and not sure what to pick between the below three things:@DWSimmons Not OP, but my EK block is waiting at home to do the same as @awedio. It works out to be about the same pre-tax (FE cards move a little), but it is single slot which is what I wanted.
Hello, what radiator and fans did You Use..ThanksWhy : just because!!
This was originally going to be a Win 10 build (now Win 10 will run as a vm.)
MB: SuperMicro X9DA7
NVMe SSD: Samsung EVO 960: 1 x 500GB, 1x 1TB
M.2 module: Amfeltec Gen 3 Carrier Board
CPU: 2x Xeon E5-26xx
RAM: 128GB DDR3
GPU: Gigabyte GTX1080Ti Founders Edition
LCD: 2x Dell 3007WFP (2560 x 1600) + 1x Dell U2415 (1920 x 1200)
Networking: Mellanox ConnectX-3 dual NIC
Water block parts: EKWB & Koolance
Case: Silverstone Temjin TJ11
Rad: Swiftech MCRx20-QP Standard version w Quad 120mm fansHello, what radiator and fans did You Use..Thanks