Hello everyone!
I am a long time lurker at STH and have been working on getting a home server/network put together, unfortunately my first attempt was a bit ill conceived on my end, although I got them at a good price. Lots of you probably already know that the Juniper EX-4200 Series switches are louder than hurricanes, so the wife said NO.... My loss is now your gain!
UPDATE:
Rusty has left the building, with a nice card!
Only 1 switch and XFP card remaining.
The Good:
For Sale are 2 EX-4200-24PS switches, each come with dual redundant EX-PWR-600AC PSUs (the big models) and rack ears. They are fully tested working. I factory reset each unit after testing them; they are running an older version of JunOS 10 I think (cannot remember off hand since it's been a week or so). I also have a matching set of 2 EX-UM-2XFP 10 Gigabit Cards from the above listed switches, also tested working when I bought them.
The Bad:
I purchased these units for my home network/JunOS lab from a local e-waste recycler. This means they're a bit scratched and dented, but that wasn't an issue for me since I planned on sticking them in the closet. They are LOUD, too loud even for my closet, I mean I turned them on and the wife thought I was insane for buying them... One of the units I have fondly nicknamed Old Rusty. All indications say that these units were decommissioned from the same location, but one of the units has some rust/corrosion on the rear casing between the PSUs and around the large side intake. I've cleaned up much of it as it was mostly surface but I don't know if any damage was done to board of the unit.
Link to some pictures of the units:
Juniper EX-4200-24P by Mam89c
I'm asking $100 per switch (including 2 PSUs and rack mounts) for the clean guys, $75 for Old Rusty (he also comes with his PSUs and rack mounts).
The XFP cards I would like $150 each but am willing to make a deal for all three
If you decide to buy all the units together with cards, I'll let it all go for $450
These switches are located in Southern California, Inland Empire area. So if you're local and I don't have to ship to you that would be great! If not, I can arrange shipping in Lower 48 USA, but it's going to be on your dime for the switches, they're heavy sons of guns. The cards, if bought separately, I will ship for free.
Please let me know if you have any questions!
I am a long time lurker at STH and have been working on getting a home server/network put together, unfortunately my first attempt was a bit ill conceived on my end, although I got them at a good price. Lots of you probably already know that the Juniper EX-4200 Series switches are louder than hurricanes, so the wife said NO.... My loss is now your gain!
UPDATE:
Rusty has left the building, with a nice card!
Only 1 switch and XFP card remaining.
The Good:
For Sale are 2 EX-4200-24PS switches, each come with dual redundant EX-PWR-600AC PSUs (the big models) and rack ears. They are fully tested working. I factory reset each unit after testing them; they are running an older version of JunOS 10 I think (cannot remember off hand since it's been a week or so). I also have a matching set of 2 EX-UM-2XFP 10 Gigabit Cards from the above listed switches, also tested working when I bought them.
The Bad:
I purchased these units for my home network/JunOS lab from a local e-waste recycler. This means they're a bit scratched and dented, but that wasn't an issue for me since I planned on sticking them in the closet. They are LOUD, too loud even for my closet, I mean I turned them on and the wife thought I was insane for buying them... One of the units I have fondly nicknamed Old Rusty. All indications say that these units were decommissioned from the same location, but one of the units has some rust/corrosion on the rear casing between the PSUs and around the large side intake. I've cleaned up much of it as it was mostly surface but I don't know if any damage was done to board of the unit.
Link to some pictures of the units:
Juniper EX-4200-24P by Mam89c
I'm asking $100 per switch (including 2 PSUs and rack mounts) for the clean guys, $75 for Old Rusty (he also comes with his PSUs and rack mounts).
The XFP cards I would like $150 each but am willing to make a deal for all three
If you decide to buy all the units together with cards, I'll let it all go for $450
These switches are located in Southern California, Inland Empire area. So if you're local and I don't have to ship to you that would be great! If not, I can arrange shipping in Lower 48 USA, but it's going to be on your dime for the switches, they're heavy sons of guns. The cards, if bought separately, I will ship for free.
Please let me know if you have any questions!
Last edited: