FS: 29x 3TB SATA HDD [SOLD]

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
TeeJayHoward

TeeJayHoward

Active Member
Feb 12, 2013
376
112
43
Code: 
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-123.20.1.el7.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST3000DM001-9YN166
Serial Number:    W1F0QV74
LU WWN Device Id: 5 000c50 05267f250
Firmware Version: CC4B
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Apr  1 06:35:30 2015 MDT

==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  584) seconds.
Offline data collection
capabilities:                    (0x73) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 335) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x3085) SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   117   099   006    Pre-fail  Always       -       144631600
  3 Spin_Up_Time            0x0003   093   092   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       38
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   072   060   030    Pre-fail  Always       -       18089662
  9 Power_On_Hours          0x0032   097   097   000    Old_age   Always       -       2682
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       38
183 Runtime_Bad_Block       0x0032   001   001   000    Old_age   Always       -       858
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   094   000    Old_age   Always       -       3 3 4587
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   070   066   045    Old_age   Always       -       30 (Min/Max 26/30)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       30
193 Load_Cycle_Count        0x0032   099   099   000    Old_age   Always       -       3430
194 Temperature_Celsius     0x0022   030   040   000    Old_age   Always       -       30 (0 18 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       4532
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       923h+43m+43.512s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       5949687455686
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       14577708731637

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      2669         -
# 2  Short offline       Completed without error       00%      2617         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
 
TeeJayHoward

TeeJayHoward

Active Member
Feb 12, 2013
376
112
43
Code: 
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-123.20.1.el7.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST3000DM001-1CH166
Serial Number:    Z1F0ZQCQ
LU WWN Device Id: 5 000c50 04e0a66cd
Firmware Version: CC43
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Apr  1 06:35:30 2015 MDT

==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  592) seconds.
Offline data collection
capabilities:                    (0x73) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 333) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x3085) SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   113   100   006    Pre-fail  Always       -       51800128
  3 Spin_Up_Time            0x0003   093   093   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       13
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   100   253   030    Pre-fail  Always       -       12885414074
  9 Power_On_Hours          0x0032   094   094   000    Old_age   Always       -       5524
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       13
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0 0 0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   069   063   045    Old_age   Always       -       31 (Min/Max 26/31)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       13
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       22
194 Temperature_Celsius     0x0022   031   040   000    Old_age   Always       -       31 (0 19 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       5524h+21m+40.610s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       168898804
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       37856898

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      5520         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-123.20.1.el7.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
 
TeeJayHoward

TeeJayHoward

Active Member
Feb 12, 2013
376
112
43
Code: 
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-123.20.1.el7.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST3000DM001-1CH166
Serial Number:    Z1F1015L
LU WWN Device Id: 5 000c50 04e09ec6b
Firmware Version: CC43
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Apr  1 06:35:30 2015 MDT

==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (  584) seconds.
Offline data collection
capabilities:                    (0x73) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 336) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x3085) SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   100   006    Pre-fail  Always       -       663976
  3 Spin_Up_Time            0x0003   091   091   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       13
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   100   253   030    Pre-fail  Always       -       214184
  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       2605
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       13
183 Runtime_Bad_Block       0x0032   099   099   000    Old_age   Always       -       1
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0 0 0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   069   064   045    Old_age   Always       -       31 (Min/Max 25/31)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       13
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       15
194 Temperature_Celsius     0x0022   031   040   000    Old_age   Always       -       31 (0 18 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       2595h+34m+39.850s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       577080
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       591281

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      2592         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-123.20.1.el7.x86_64] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
 
T_Minus

T_Minus

Build. Break. Fix. Repeat
Feb 15, 2015
7,641
2,058
113
TeeJayHoward said:
I will update when the drives are sold (packed up and shipped out). I'm getting the SMART info off the last five drives now.
Click to expand...
Well, since you PMed me before you even made this thread alerting me that you listed them for sale... and then I said I'd take 2.

Why are you NOT considering my 2 sold? or providing me payment information?
 
Last edited:
TeeJayHoward

TeeJayHoward

Active Member
Feb 12, 2013
376
112
43
T_Minus said:
Well, since you PMed me before you even made this thread alerting me that you listed them for sale... and then I said I'd take 2.

Why are you NOT considering my 2 sold? or providing me payment information?
Click to expand...
You were not the only person who I PM'd. I also had a line of conversation open with the TubaMT. I PM'd both of you, and he responded first. Looks like you missed it by 3 hours. (6:40 vs. 9:22)
 
T_Minus

T_Minus

Build. Break. Fix. Repeat
Feb 15, 2015
7,641
2,058
113
I don't mind I missed it but it's very weird how you've gone about this process of selling things.

You basically offered your item to lot of people in private and then posted a public thread. And then you tell us they were all sold??? Why even make the thread?


Thanks for updating me but in the future I'd appreciate a PM reply and me not having to chase you down in a thread ;) to find out the status...
 
TeeJayHoward

TeeJayHoward

Active Member
Feb 12, 2013
376
112
43
T_Minus said:
I don't mind I missed it but it's very weird how you've gone about this process of selling things.
Click to expand...
I agree. In the future, I will do it differently. This whole thing went sideways pretty quickly. My first thread read like an ad, my second one got mixed up with PMs, and the items sold within minutes of my post. Then I realized that I misrepresented the drives, and had to re-test them. I apologize to anyone caught up in this mess.

Thanks for updating me but in the future I'd appreciate a PM reply and me not having to chase you down in a thread ;) to find out the status...
Click to expand...
That's definitely a good point. I could have handled this a lot better. Sorry about that!
 
Last edited:
  • Like
Reactions: T_Minus
T_Minus

T_Minus

Build. Break. Fix. Repeat
Feb 15, 2015
7,641
2,058
113
Completely understandable, and no hard feelings!

I like to be open, and up front but often it comes off as abrasive (which I can be), so I apologize if it seemed rude :)
 
T

TubaMT

Member
Jul 26, 2014
112
21
18
T_Minus said:
Completely understandable, and no hard feelings!

I like to be open, and up front but often it comes off as abrasive (which I can be), so I apologize if it seemed rude :)
Click to expand...
Sorry about that @T_Minus :/ I probably contributed to some of the miscommunication as well :/ I PMed @TeeJayHoward earlier yesterday and then PM'ed him again as well as replying to this thread publicly. I apologize for the mix up!
 
  • Like
Reactions: T_Minus
confusingboat

confusingboat

New Member
Mar 27, 2015
7
1
3
Minnesota
www.convectionsoftware.com
Not the most relevant response, and I apologize ahead of time, but I never had good luck with the ST3000DM001.

I ran 6 of them in a RAID10 and had 3 of them fail within 9 months. This is right in line with Backblaze's results, and I've since switched to the WD Red 3TB (currently running 8 of them in a RAID10), which wasn't out when I initially built my server.

I'm curious to know if the buyer is planning to use or resell them.
 
K

Kristian

Active Member
Jun 1, 2013
347
84
28
TeeJayHoward said:
I looked for a way to do this, but couldn't find one. Is this something only a mod can do, or did I just miss the right button to edit the title?
Click to expand...
When scrolling to your first post you should see a button called thread tools . There you should be able to edit the title
 

Attachments

TeeJayHoward

TeeJayHoward

Active Member
Feb 12, 2013
376
112
43
Kristian said:
When scrolling to your first post you should see a button called thread tools . There you should be able to edit the title
Click to expand...
My only option is to add a poll. I can't edit the title. Looks like a kind moderator took care of it for me, though!
 
  • Like
Reactions: Kristian
T

TubaMT

Member
Jul 26, 2014
112
21
18
confusingboat said:
Not the most relevant response, and I apologize ahead of time, but I never had good luck with the ST3000DM001.

I ran 6 of them in a RAID10 and had 3 of them fail within 9 months. This is right in line with Backblaze's results, and I've since switched to the WD Red 3TB (currently running 8 of them in a RAID10), which wasn't out when I initially built my server.

I'm curious to know if the buyer is planning to use or resell them.
Click to expand...
Backblaze's study is a great resource but it also points out the bathtub curve that most drives die out within the first few months to a year and then after that last a bit longer. Most of these drives would be in the part of the curve that they won't die out for a little while. Even if 50% of the drives survive, like Backblaze suggests in one of their blog posts, I still will have a lot of space to use.

I plan to use most of these for media that will be backed up as well but also for some cryptocurrencies. There's something called Maidsafecoin, Storj coin, and Burst coin that use spare computer resources, including storage space to create coins or be paid in coins. I'm into cryptos so it could be fun to use the extra storage space for it.
 
  • Like
Reactions: TeeJayHoward
T_Minus

T_Minus

Build. Break. Fix. Repeat
Feb 15, 2015
7,641
2,058
113
TubaMT said:
Backblaze's study is a great resource but it also points out the bathtub curve that most drives die out within the first few months to a year and then after that last a bit longer. Most of these drives would be in the part of the curve that they won't die out for a little while. Even if 50% of the drives survive, like Backblaze suggests in one of their blog posts, I still will have a lot of space to use.

I plan to use most of these for media that will be backed up as well but also for some cryptocurrencies. There's something called Maidsafecoin, Storj coin, and Burst coin that use spare computer resources, including storage space to create coins or be paid in coins. I'm into cryptos so it could be fun to use the extra storage space for it.
Click to expand...
Interesting info on the crypto stuff, hadn't heard of that hardware being used.
 
  • Like
Reactions: TeeJayHoward
You must log in or register to reply here.
Top Bottom