i just moved the cmos pins on both nodes to clear the config..
this message came up from the usb console..on node 0
ERROR: Class:3000000; Subclass:50000; Operation: A
then the message went away and it went to the normal press f2 to get into the bios..
i still can get nothing from the rj45 console ( im a cisco ccnp and a wireless engineer..) i used secure crt at 9600, 19200, 38400, 57600 , 115200 and absolutely nothing.. the cable is a trendnet su-9 prolific usb to serial cable connected to a standard cisco blue flat console cable. this works fine in my hp switch..
its probably .. something im doing or not doing.. or dont know how to do..
but can someone confirm the rj45s do send output , i dont mind working out the details.. but if wont work.. that will just make me crazy..
thanks
oh and i tried glc-t sfp on the board that is a cisco sftp to copper 1 gig transciever.. same result . lights on the switch but nothing else..
also tried a 10g sfp+ to coppper to a cat 6a cable . to switch. switch shows 10 gig link light.
everything is back to working after clearing the cmos.. but this is with the batteries removed , with the batteries installed ( they are brand new) i just get "3" on the led...
so im sorta good at the moment..
are the usb ports 3.0 or 2.0?
hope this info will help someone else.
this message came up from the usb console..on node 0
ERROR: Class:3000000; Subclass:50000; Operation: A
then the message went away and it went to the normal press f2 to get into the bios..
i still can get nothing from the rj45 console ( im a cisco ccnp and a wireless engineer..) i used secure crt at 9600, 19200, 38400, 57600 , 115200 and absolutely nothing.. the cable is a trendnet su-9 prolific usb to serial cable connected to a standard cisco blue flat console cable. this works fine in my hp switch..
its probably .. something im doing or not doing.. or dont know how to do..
but can someone confirm the rj45s do send output , i dont mind working out the details.. but if wont work.. that will just make me crazy..
thanks
oh and i tried glc-t sfp on the board that is a cisco sftp to copper 1 gig transciever.. same result . lights on the switch but nothing else..
also tried a 10g sfp+ to coppper to a cat 6a cable . to switch. switch shows 10 gig link light.
everything is back to working after clearing the cmos.. but this is with the batteries removed , with the batteries installed ( they are brand new) i just get "3" on the led...
so im sorta good at the moment..
are the usb ports 3.0 or 2.0?
hope this info will help someone else.
Last edited: