Dell Compellent SC200/SC400 Enclosures & SATA?

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
F

funar

New Member
May 17, 2022
10
0
1
Long time lurker (even before actually opening an account here).

I'm hoping someone has some ideas here. A brief background - I have a number of Dell SC200, SC220, SC400, and SC420 enclosures that were removed from two different Dell Compellent clusters (2x SC8000's and 2xSC9000's - which I also have). I'm looking to repurpose the enclosures themselves in a new TrueNAS SCALE deployment to replace my Debian file server with older Xyratex HB-1235 enclosures. I had read many people on these forums having success with SATA disks on these enclosures. So, it seemed a good time to retire the HB-1235's.

I have two SC420s running fine with 4TB SAS SSDs. The problem I'm having is that I cannot get the SC200's or SC400's to recognize SATA disks, with or without interposers installed. I've tried Seagate Ironwolf 10TB Red, Seagate Exos 20TB, and even some really old WD RED 6TB and Seagate 1TB Baracuda disks. Without the interposer attached, the lower light of the drive sled illuminates, but there's never any activity light present. With the interposer installed, no lights at all illuminate. TrueNAS SCALE never notices the drive getting inserted or removed in all cases. If I insert a SAS disk, everything functions as expected. Ideally, I'd like to run the Exos disks in there.

I've tried both Dell PN939 interposers and NetApp DS4243/DS4246 ones (which seemed to be the recommended ones).

The SC400 reports firmware v1.09 via lsscsi (which I suspect is the problem). There's a USB service port which identifies itself as an FTDI serial device on the back of the EMM's in the SC4x0 enclosures, but it asks for a password and I have not been able to figure out what that password is. I was hoping there was a feature or function that could be used in there to determine the reason for the drives not coming up.

Thanks to anyone out there with any insight.
 
F

funar

New Member
May 17, 2022
10
0
1
SadoKitten said:
See here https://forums.servethehome.com/index.php?threads/fun-with-an-md1200-md1220-sc200-sc220.27487/
Click to expand...
I've been through that thread a few times and found good nuggets of information here and there, but nothing really specific about the SC400-series. Indeed, there were a couple of people asking about SATA support not working, but no suggestions for fixes.

I'm trying to get my hands on a serial cable for the SC200-series or I may make one this weekend, but my main focus is on the SC400s.
 
O

oldfett

Member
Jul 20, 2016
30
14
8
36
1.09 is the newest firmware for the SC4x0 enclosures.

Do you have SAS cables plugged into both EMM or just one? Can you try with just the top EMM SAS cable plugged in? I have access to an SC400 and could try this later to confirm, but my understanding is that SATA drives in these enclosures only ever talk via the top EMM, which also always seeks to be the master/primary EMM of the chassis (not that it matters but interesting note).
 
Last edited:
F

funar

New Member
May 17, 2022
10
0
1
oldfett said:
1.09 is the newest firmware for the SC4x0 enclosures.

Do you have SAS cables plugged into both EMM or just one? Can you try with just the top EMM SAS cable plugged in? I have access to an SC400 and could try this later to confirm, but my understanding is that SATA drives in these enclosures only ever talk via the top EMM, which also always seeks to be the master/primary EMM of the chassis (not that it matters but interesting note).
Click to expand...
I did have SAS cables connected to both EMM's. For grins, I removed the lower EMM, tested, and then reinserted the lower EMM, pulled the upper one, power-cycling the enclosure between tests, and I get the same results as above.

I do have several Dell SAS 4TB disks for this enclosure. I made one additional observation with them. When inserting a SAS disk, the lower light blinks for 3-5 seconds before turning solid green. When inserting the SATA disk with the interposer, the light does not illuminate at all. Non-interposer SATA disks simply illuminate a dim green with no blinking. My assumption is the EMMs are rejecting or otherwise not recognizing the SATA disks. Either way, it's odd behavior.
 
O

oldfett

Member
Jul 20, 2016
30
14
8
36
Interesting, OK. I have SC200's running right now with some SATA drives connected via a 9201. I'll be honest I've never tried an SC400 but I guess I always assumed it would work the same. I'll try to put some SATA drives in an SC400 this weekend and see if I get the same behavior out of curiosity and post back here once done.
 
F

funar

New Member
May 17, 2022
10
0
1
Minor update... After examining a firmware image I had as part of the former Compellent's SCOS upgrade, I discovered the SC400 is actually an MD1400 in disguise, and the SC420 is actually an MD1420 - which makes sense given the history of the SC200/SC220. The USB serial password for both is "bluemoon" for anyone down the road.

Mods - if this isn't OK to post here, please feel free to blank out the password. Given the Compellent has been recently EOL/EOS (also why I have it in my possession now), I hope it's OK.
 
Last edited:
O

oldfett

Member
Jul 20, 2016
30
14
8
36
Well, kind of looking like I made an incorrect assumption because SATA worked in the SC200 it would work in the SC400. Like you are seeing, my SATA drives aren't coming online. Interestingly enclosure sees this as a bad phy

Code: 
 Slot PHY# |  Cross Check  | Local State
 ---- ---- | ------------- | -----------
  00   05  | 0 MATCHED     | 1 BAD PHY  <<<
  01   02  | 0 MATCHED     | 1 BAD PHY  <<<
  02   07  | 0 MATCHED     | 1 BAD PHY  <<<
  03   06  | 0 MATCHED     | 3 GOOD

Some surfing around google looks like there are a few posts saying SATA doesn't work with the MD1400. Curious.
 
F

funar

New Member
May 17, 2022
10
0
1
Where were you pulling the state from?

It sort of makes me wonder if this is a firmware limitation that was imposed or an actual hardware limitation -- or even an obscure configuration option within the engineering console. I'll pull one of my SC200s out again and see what's going on there, but I seem to remember I was getting the same response. Could be a firmware thing if that's the case.
 
O

oldfett

Member
Jul 20, 2016
30
14
8
36
So this is the full output of the SC400, SATA drives in slots 0-2, and SAS drive in slot 3. Reset are empty.
Code: 
 Bluemoon:1.09 S0 >slot stats

Slot Thread - Presence Changed Interrupts handled: 0

Local datastore contains 12 Elements of Type 0x17 "Enclosure Drive Slot"
0x00000000:  [06 00 00 00]  [06 00 00 00]  [06 00 00 00]  [06 00 00 00]
0x00000004:  [05 00 00 00]  [05 00 00 00]  [05 00 00 00]  [05 00 00 00]
0x00000008:  [05 00 00 00]  [05 00 00 00]  [05 00 00 00]  [05 00 00 00]

        Slot PHY# |  Cross Check  | Local State
        ---- ---- | ------------- | -----------
         00   05  | 0 MATCHED     | 1 BAD PHY
         01   02  | 0 MATCHED     | 1 BAD PHY
         02   07  | 0 MATCHED     | 1 BAD PHY
         03   06  | 0 MATCHED     | 3 GOOD
         04   04  | 0 MATCHED     | 0 GOOD
         05   01  | 0 MATCHED     | 0 GOOD
         06   08  | 0 MATCHED     | 0 GOOD
         07   11  | 0 MATCHED     | 0 GOOD
         08   03  | 0 MATCHED     | 0 GOOD
         09   00  | 0 MATCHED     | 0 GOOD
         10   09  | 0 MATCHED     | 0 GOOD
         11   10  | 0 MATCHED     | 0 GOOD

Raw Memory states
        Presence: 0000000F
            Link: 00000008
         Pin3off: 00000000


 Bluemoon:1.09 S0 >phyinfo
                   SSSSSSS                                                      E E
              PHY  STMSTMA                              ZONE      CONN CONN MAP DFR
PHY  DEV      CNG  PPPPPPT                   ROUTE ZONE CTRL CONN ELEM PHY  PHY FCR
ID   TYPE NLR CNT  IIITTTA ATTACHED SAS ADDR TYPE  GRP  BUS  TYPE INDX LINK ID  BSL

00        0x0 0x00 -------                     D   0x00 0x00 0x20 0x09 0x00 000 ---
01        0x0 0x00 -------                     D   0x00 0x00 0x20 0x05 0x00 001 ---
02        0x0 0x02 -------                     D   0x00 0x00 0x20 0x01 0x00 002 ---
03        0x0 0x00 -------                     D   0x00 0x00 0x20 0x08 0x00 003 ---
04        0x0 0x00 -------                     D   0x00 0x00 0x20 0x04 0x00 004 ---
05        0x0 0x02 -------                     D   0x00 0x00 0x20 0x00 0x00 005 ---
06   END  12G 0x05 ---1--- 5000C500_864AD905   D   0x00 0x00 0x20 0x03 0x00 006 ---
07        0x0 0x02 -------                     D   0x00 0x00 0x20 0x02 0x00 007 ---
08        0x0 0x00 -------                     D   0x00 0x00 0x20 0x06 0x00 008 ---
09        0x0 0x00 -------                     D   0x00 0x00 0x20 0x0A 0x00 009 ---
10        0x0 0x00 -------                     D   0x00 0x00 0x20 0x0B 0x00 010 ---
11        0x0 0x00 -------                     D   0x00 0x00 0x20 0x07 0x00 011 ---
12   END  12G 0x0b 111---- 5000D310_01006C25   T   0x00 0x00 0x05 0x00 0x01 012 ---
13   END  12G 0x0b 111---- 5000D310_01006C25   T   0x00 0x00 0x05 0x00 0x00 013 ---
14   END  12G 0x0b 111---- 5000D310_01006C25   T   0x00 0x00 0x05 0x00 0x02 014 ---
15   END  12G 0x0b 111---- 5000D310_01006C25   T   0x00 0x00 0x05 0x00 0x03 015 ---
16        0x0 0x04 -------                     T   0x00 0x00 0x05 0x01 0x01 016 ---
17        0x0 0x04 -------                     T   0x00 0x00 0x05 0x01 0x00 017 ---
18        0x0 0x04 -------                     T   0x00 0x00 0x05 0x01 0x02 018 ---
19        0x0 0x04 -------                     T   0x00 0x00 0x05 0x01 0x03 019 ---
20   EXP  12G 0x03 -----1- 5F8DB882_FD94C1FF   T   0x00 0x00 0x71 0x00 0x00 020 ---
21   EXP  12G 0x03 -----1- 5F8DB882_FD94C1FF   T   0x00 0x00 0x71 0x00 0x01 021 ---
22        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 022 ---
23        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 023 ---
24        0x1 0x00 -------                     D   0x00 0x00 0x00 0x00 0x00 024 ---
25        0x1 0x00 -------                     D   0x00 0x00 0x00 0x00 0x00 025 ---
26        0x1 0x00 -------                     D   0x00 0x00 0x00 0x00 0x00 026 ---
27        0x1 0x00 -------                     D   0x00 0x00 0x00 0x00 0x00 027 ---
28        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 028 ---
29        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 029 ---
30        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 030 ---
31        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 031 ---
32        0x1 0x00 -------                     D   0x00 0x00 0x00 0x00 0x00 032 ---
33        0x1 0x00 -------                     D   0x00 0x00 0x00 0x00 0x00 033 ---
34        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 034 ---
35        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 035 ---
36        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 036 ---
37        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 037 ---
38        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 038 ---
39        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 039 ---
40        0x1 0x00 -------                     T   0x00 0x00 0x05 0x02 0x01 040 ---
41        0x1 0x00 -------                     T   0x00 0x00 0x05 0x02 0x00 041 ---
42        0x1 0x00 -------                     T   0x00 0x00 0x05 0x02 0x02 042 ---
43        0x1 0x00 -------                     T   0x00 0x00 0x05 0x02 0x03 043 ---
44        0x1 0x00 -------                     T   0x00 0x00 0x05 0x03 0x01 044 ---
45        0x1 0x00 -------                     T   0x00 0x00 0x05 0x03 0x00 045 ---
46        0x1 0x00 -------                     T   0x00 0x00 0x05 0x03 0x02 046 ---
47        0x1 0x00 -------                     T   0x00 0x00 0x05 0x03 0x03 047 ---
SXP0 END  12G 0x01 --11--- 5F8DB882_FD94C17D   D   0x01 0x00 0x2F 0x0C 0x00 048
SXP1 END  12G 0x01 1----1- 5F8DB882_FD94C17F   D   0x01 0x00 0x00 0x00 0x00 049
SXP2      0x0 0x00 -------                     D   0x00 0x00 0x00 0x00 0x00 050

Expander Change Count:  0056
Zone Configuring:  0
Self Configuring:  0
Configuring:  0

Here is an SC200 I am using, this was plug and play working for me. Slots 0-7 are SATA drives and slots 8-11 are SAS drives
Code: 
12Pack.Slot0.1.03.000 >_phyinfo
Expander SAS ADDRESS: 500c04f2222e533f
ELI ADDRESS:          500c04f2222e5300
VPHY ADDRESS:         500c04f2222e533d
ISIM ADDRESS:         500c04f2222e53bd


                               SSSSSSS                        CONN CONN CONN MAP DFE
              PHY        ZONE  STMSTMA                  ROUTE TYPE ELEM PHY  PHY ADAPT
PHY TYPE NLR  CNG  ZONE  CTRL  PPPPPPT ATTACHED SAS ADDR TYPE INDX LINK ID       VAL
              CNT  GRP   BUS   IIITTTA
00       0x0  0x00 0x00  0x00  -------                     T  0x00 0xFF 0x00 000
01       0x0  0x00 0x00  0x00  -------                     T  0x00 0xFF 0x00 001
02       0x1  0x00 0x00  0x00  -------                     T  0x00 0xFF 0x00 002
03       0x1  0x00 0x00  0x00  -------                     T  0x00 0xFF 0x00 003
04  END  6.0  0x05 0x45  0x00  111---- 5000D310_010FD91F   T  0x02 0xFF 0x00 004 0x0
05  END  6.0  0x05 0x59  0x00  111---- 5000D310_010FD91F   T  0x02 0xFF 0x01 005 0x0
06  END  6.0  0x05 0xcc  0x00  111---- 5000D310_010FD91F   T  0x02 0xFF 0x02 006 0x0
07  END  6.0  0x05 0x01  0x00  111---- 5000D310_010FD91F   T  0x02 0xFF 0x03 007 0x0
08  EXP  6.0  0x01 0xf8  0x00  -----1- 500C04F2_AD81B63F   T  0x02 0xFF 0x00 008 0x0
09  EXP  6.0  0x01 0x0e  0x00  -----1- 500C04F2_AD81B63F   T  0x02 0xFF 0x01 009 0x0
10  EXP  6.0  0x01 0x04  0x00  -----1- 500C04F2_AD81B63F   T  0x02 0xFF 0x02 010 0x0
11  EXP  6.0  0x01 0x15  0x00  -----1- 500C04F2_AD81B63F   T  0x02 0xFF 0x03 011 0x0
12       0x1  0x00 0x00  0x00  -------                     D  0x00 0xFF 0x00 012
13       0x1  0x00 0x00  0x00  -------                     D  0x00 0xFF 0x00 013
14       0x1  0x00 0x00  0x00  -------                     D  0x00 0xFF 0x00 014
15       0x1  0x00 0x00  0x00  -------                     D  0x00 0xFF 0x00 015
16       0x1  0x00 0x00  0x00  -------                     D  0x00 0xFF 0x00 016
17       0x1  0x00 0x00  0x00  -------                     D  0x00 0xFF 0x00 017
18       0x1  0x00 0x00  0x00  -------                     D  0x00 0xFF 0x00 018
19       0x1  0x00 0x00  0x00  -------                     D  0x00 0xFF 0x00 019
20       0x1  0x00 0x00  0x00  -------                     D  0x00 0xFF 0x00 020
21       0x1  0x00 0x00  0x00  -------                     D  0x00 0xFF 0x00 021
22       0x1  0x00 0x00  0x00  -------                     D  0x00 0xFF 0x00 022
23       0x1  0x00 0x00  0x00  -------                     D  0x00 0xFF 0x00 023
24  END  6.0  0x01 0xa1  0x00  ---1--- 5000CCA2_66A3D41D   D  0x20 0x08 0x00 024 0x0
25  END  6.0  0x01 0xe0  0x00  ---1--- 5000CCA2_6B692B35   D  0x20 0x09 0x00 025 0x0
26  END  6.0  0x0b 0x02  0x00  ------1 500C04F2_222E531A   D  0x20 0x05 0x00 026 0x0
27  END  6.0  0x06 0xe1  0x00  ------1 500C04F2_222E531B   D  0x20 0x01 0x00 027 0x0
28  END  6.0  0x01 0x11  0x00  ---1--- 5000CCA2_663DBE0D   D  0x20 0x0A 0x00 028 0x0
29  END  6.0  0x06 0x28  0x00  ------1 500C04F2_222E531D   D  0x20 0x06 0x00 029 0x0
30  END  6.0  0x06 0x00  0x00  ------1 500C04F2_222E531E   D  0x20 0x02 0x00 030 0x0
31  END  6.0  0x06 0x01  0x00  ------1 500C04F2_222E531F   D  0x20 0x03 0x00 031 0x0
32  END  6.0  0x06 0x00  0x00  ------1 500C04F2_222E5320   D  0x20 0x04 0x00 032 0x0
33  END  6.0  0x06 0x05  0x00  ------1 500C04F2_222E5321   D  0x20 0x00 0x00 033 0x0
34  END  6.0  0x06 0x28  0x00  ------1 500C04F2_222E5322   D  0x20 0x07 0x00 034 0x0
35  END  6.0  0x01 0x0f  0x00  ---1--- 5000CCA2_66A7B411   D  0x20 0x0B 0x00 035 0x0
SXP END  6.0  0x01 0x00  0x00  1-11--- 500C04F2_222E533D   D  0x2F 0xFF 0x24 036
STP      0x0  0x00 0x00  0x00  ----1--                     D  0x00 0xFF 0x00 037
EXP END  6.0  0x01 0x00  0x00  ---1-1- 500C04F2_222E533F   D  0x00 0x00 0x00 038


I'm torn if this is firmware, its turned off in the configuration or a hardware limitation (this one I dont' think so).
 
O

oldfett

Member
Jul 20, 2016
30
14
8
36
I wasn't very hopeful, but manually setting the speed (3G and 6G) via phyop on the SC400 did not help.
 
F

funar

New Member
May 17, 2022
10
0
1
I don't have the serial cable for the SC200 yet - I ordered one from eBay after deciding I didn't want to sacrifice one of the few PS/2 devices I have left. It should arrive this week.

I noticed your SC200 was on v1.03. I have a total of 6 SC200s. The ones from the SC8000 seem to also be on v1.03 according to lsscsi. They work fine. My assumption of "newer firmware is better" definitely holds false here. The SC200s that were connected to the SC9000s are running v1.06, and do not work. I'm halfway tempted to load the 1.04 image I have for the SC400s to see if there's any luck there - it's included in the scMaintenanceInstall_R06.07.05.005.03.iso I kept an archive of. If I wasn't concerned about bricking the thing, that is.

Still, I'm leaning more toward firmware being the culprit for the SC400s. I'd consider placing good money on Dell disabling SATA support somewhere along the line - especially as Compellent units started showing up on the used market.

Edit: typo
 
Last edited:
O

oldfett

Member
Jul 20, 2016
30
14
8
36
I'm not saying its not possible, but I don't think the Compellent developers would have disabled SATA support out of spite. Compellent controlled the drives installed primarily using a Dell vendor flag in the drives firmware, they also had information written to the drive to classify it as a server/PowerVault drive, SC drive, EQL drive and later SCv drive. I don't think it would have been worth their time to disable SATA support unless the PowerVault folks did so and that firmware then made it into an SC release (not like they would have tested SATA drives as those were never supported on SC).

You are right though my SC200's are on older firmware, they worked so I never saw fit to change it. I have a spare not in use so out of curiosity in the next few days I can mirror what you are doing. Upgrade the firmware on my spare SC200 and try downgrading the firmware on this SC400.
 
F

funar

New Member
May 17, 2022
10
0
1
Oh, I don't believe the Compellent folks would have done anything like that for "spite" either. I know a couple of the former Copilot Support staff on a personal level - they're all amazing people that really miss working at Compellent-proper. Since the SC8000 and SC9000 series were little more than the PowerVault systems with SCOS installed, I could see the lack of SATA support as an after-effect versus an intentional change.

I do miss having Compellent at my day-job. That was a 15 year run of probably the best supported, most reliable, storage system in my 30+ years in IT. Dell really should have kept it around for a mid-range solution, but I digress.

I'll likely attempt the downgrade of the SC400 this week and see how it goes. If I brick it, I brick it. It doesn't have much value as a SAS-only enclosure for a home data hoarder like myself...and my electric bill is bad enough. I could load them up with the 4TB SAS disks I have sitting around, but I suspect my wife would murder me. ;)
 
O

oldfett

Member
Jul 20, 2016
30
14
8
36
It looks like the latest official firmware for the SC200's is 1.03 as of SCOS 7.5.10. From the PowerVault realm looks like there is a 1.06. I think there is a therad on here where folks have upgraded to the MD firmware. I guess with that said I'm not sure why these enclosures are working for me but not for you as far as SATA support goes.

For the SC400 got ahold of 1.04 and flashed that. Unfortunately no change, still not seeing the SATA drives. I am not local to the box though, so I can't power cycle the whole enclosure, just power cycle the IO modules and slots following the firmware downgrade.

Code: 
 Bluemoon:1.04 S0 >phyinfo
                   SSSSSSS                                                      E E
              PHY  STMSTMA                              ZONE      CONN CONN MAP DFR
PHY  DEV      CNG  PPPPPPT                   ROUTE ZONE CTRL CONN ELEM PHY  PHY FCR
ID   TYPE NLR CNT  IIITTTA ATTACHED SAS ADDR TYPE  GRP  BUS  TYPE INDX LINK ID  BSL

00        0x0 0x00 -------                     D   0x00 0x00 0x20 0x09 0x00 000 1-1
01        0x0 0x00 -------                     D   0x00 0x00 0x20 0x05 0x00 001 1-1
02        0x0 0x00 -------                     D   0x00 0x00 0x20 0x01 0x00 002 1-1
03        0x0 0x00 -------                     D   0x00 0x00 0x20 0x08 0x00 003 1-1
04        0x0 0x00 -------                     D   0x00 0x00 0x20 0x04 0x00 004 1-1
05        0x0 0x00 -------                     D   0x00 0x00 0x20 0x00 0x00 005 1-1
06   END  12G 0x01 ---1--- 5000C500_864AD905   D   0x00 0x00 0x20 0x03 0x00 006 ---
07        0x0 0x00 -------                     D   0x00 0x00 0x20 0x02 0x00 007 1-1
08        0x0 0x00 -------                     D   0x00 0x00 0x20 0x06 0x00 008 1-1
09        0x0 0x00 -------                     D   0x00 0x00 0x20 0x0A 0x00 009 1-1
10        0x0 0x00 -------                     D   0x00 0x00 0x20 0x0B 0x00 010 1-1
11        0x0 0x00 -------                     D   0x00 0x00 0x20 0x07 0x00 011 1-1
12   END  12G 0x01 111---- 5000D310_01006C25   T   0x00 0x00 0x05 0x00 0x01 012 ---
13   END  12G 0x01 111---- 5000D310_01006C25   T   0x00 0x00 0x05 0x00 0x00 013 ---
14   END  12G 0x01 111---- 5000D310_01006C25   T   0x00 0x00 0x05 0x00 0x02 014 ---
15   END  12G 0x01 111---- 5000D310_01006C25   T   0x00 0x00 0x05 0x00 0x03 015 ---
16        0x1 0x00 -------                     T   0x00 0x00 0x05 0x01 0x01 016 ---
17        0x1 0x00 -------                     T   0x00 0x00 0x05 0x01 0x00 017 ---
18        0x1 0x00 -------                     T   0x00 0x00 0x05 0x01 0x02 018 ---
19        0x1 0x00 -------                     T   0x00 0x00 0x05 0x01 0x03 019 ---
20   EXP  12G 0x01 -----1- 5F8DB882_FD94C1FF   T   0x00 0x00 0x71 0x00 0x00 020 ---
21   EXP  12G 0x01 -----1- 5F8DB882_FD94C1FF   T   0x00 0x00 0x71 0x00 0x01 021 ---
22        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 022 ---
23        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 023 ---
24        0x1 0x00 -------                     D   0x00 0x00 0x00 0x00 0x00 024 ---
25        0x1 0x00 -------                     D   0x00 0x00 0x00 0x00 0x00 025 ---
26        0x1 0x00 -------                     D   0x00 0x00 0x00 0x00 0x00 026 ---
27        0x1 0x00 -------                     D   0x00 0x00 0x00 0x00 0x00 027 ---
28        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 028 ---
29        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 029 ---
30        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 030 ---
31        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 031 ---
32        0x1 0x00 -------                     D   0x00 0x00 0x00 0x00 0x00 032 ---
33        0x1 0x00 -------                     D   0x00 0x00 0x00 0x00 0x00 033 ---
34        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 034 ---
35        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 035 ---
36        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 036 ---
37        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 037 ---
38        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 038 ---
39        0x1 0x00 -------                     T   0x00 0x00 0x00 0x00 0x00 039 ---
40        0x1 0x00 -------                     T   0x00 0x00 0x05 0x02 0x01 040 ---
41        0x1 0x00 -------                     T   0x00 0x00 0x05 0x02 0x00 041 ---
42        0x1 0x00 -------                     T   0x00 0x00 0x05 0x02 0x02 042 ---
43        0x1 0x00 -------                     T   0x00 0x00 0x05 0x02 0x03 043 ---
44        0x1 0x00 -------                     T   0x00 0x00 0x05 0x03 0x01 044 ---
45        0x1 0x00 -------                     T   0x00 0x00 0x05 0x03 0x00 045 ---
46        0x1 0x00 -------                     T   0x00 0x00 0x05 0x03 0x02 046 ---
47        0x1 0x00 -------                     T   0x00 0x00 0x05 0x03 0x03 047 ---
SXP0 END  12G 0x01 --11--- 5F8DB882_FD94C17D   D   0x01 0x00 0x2F 0x0C 0x00 048
SXP1 END  12G 0x01 1----1- 5F8DB882_FD94C17F   D   0x01 0x00 0x00 0x00 0x00 049
SXP2      0x0 0x00 -------                     D   0x00 0x00 0x00 0x00 0x00 050

Expander Change Count:  000b
Zone Configuring:  0
Self Configuring:  0
Configuring:  0



 Bluemoon:1.04 S0 >slot stats

Slot Thread - Presence Changed Interrupts handled: 1

Local datastore contains 12 Elements of Type 0x17 "Enclosure Drive Slot"
0x00000000:  [06 00 00 00]  [06 00 00 00]  [06 00 00 00]  [06 00 00 00]
0x00000004:  [05 00 00 00]  [05 00 00 00]  [05 00 00 00]  [05 00 00 00]
0x00000008:  [05 00 00 00]  [05 00 00 00]  [05 00 00 00]  [05 00 00 00]

        Slot PHY# |  Cross Check  | Local State
        ---- ---- | ------------- | -----------
         00   05  | 0 MATCHED     | 1 BAD PHY
         01   02  | 0 MATCHED     | 1 BAD PHY
         02   07  | 0 MATCHED     | 1 BAD PHY
         03   06  | 0 MATCHED     | 3 GOOD
         04   04  | 0 MATCHED     | 0 GOOD
         05   01  | 0 MATCHED     | 0 GOOD
         06   08  | 0 MATCHED     | 0 GOOD
         07   11  | 0 MATCHED     | 0 GOOD
         08   03  | 0 MATCHED     | 0 GOOD
         09   00  | 0 MATCHED     | 0 GOOD
         10   09  | 0 MATCHED     | 0 GOOD
         11   10  | 0 MATCHED     | 0 GOOD

Raw Memory states
        Presence: 0000000F
            Link: 00000008
         Pin3off: 00000000
 
F

funar

New Member
May 17, 2022
10
0
1
I had the chance to try 1.04 on one of my SC400s as well. Also, no dice. I suspect getting those to work with SATA disks is a non-starter. I'll keep looking for other things to try there.

My serial cable for the SC200s doesn't arrive until tomorrow. I'll push 1.03 onto one of the SC200s that wouldn't recognize SATA disks and see what happens there.
 
M

mr44er

Active Member
Feb 22, 2020
135
43
28
Didn't read the thread in detail, sorry if it was mentioned already.
SATA is single path, so only one canister/controller has to be installed and it has to be the upper slot. Do a cold start in between your tests.
This config you can mix with SAS-disks.

If you need two or more controllers, you have to use SAS-only for full speed. SATA would need interposer in this config (fakes dual path but cuts the bandwidth 50:50, you probably don't want this)

Firmware revisions and locks are another thing.
 
You must log in or register to reply here.
Top Bottom