Hello everybody,
after seeing the review of the CWWK N305 (seems to be the CW-AL-4L-V2.0 N305 tall-fin Unit - with 6x USB2 and 2x USB3) I ordered one with the shown M.2 Expansion Board (CW-ADLN-4PCIE V0.6).
I would like to install 5 M.2 Drives. So far I installed Proxmox on the first drive that is installed on the M.2 Wifi to M.2 Adapter.
Now I want to install the storage drives in the 4x expansion adapter (installed above the other drive and the RAM).
If I install the first drive in the first slot of the adapter it is showing up (lspci says its 1x - without the adapter shows as 4x, which is expected), but not in the other slots.
Does anyone know how I enable 1x1x1x1x PCIe bifurcation for the adapter? I assume that this is the issue, but I can not find an option for this in the BIOS.
Thanks!
P.S.: Seems that I should have posted this under Hardware -> Networking, sorry.
after seeing the review of the CWWK N305 (seems to be the CW-AL-4L-V2.0 N305 tall-fin Unit - with 6x USB2 and 2x USB3) I ordered one with the shown M.2 Expansion Board (CW-ADLN-4PCIE V0.6).
I would like to install 5 M.2 Drives. So far I installed Proxmox on the first drive that is installed on the M.2 Wifi to M.2 Adapter.
Now I want to install the storage drives in the 4x expansion adapter (installed above the other drive and the RAM).
If I install the first drive in the first slot of the adapter it is showing up (lspci says its 1x - without the adapter shows as 4x, which is expected), but not in the other slots.
Does anyone know how I enable 1x1x1x1x PCIe bifurcation for the adapter? I assume that this is the issue, but I can not find an option for this in the BIOS.
Thanks!
P.S.: Seems that I should have posted this under Hardware -> Networking, sorry.
Last edited: