CSE-PTJBOD-CB3: remote power on script?

[Kristian]

Hello everyone,

is there a way to remote power on a CSE-PTJBOD-CB3 without having to log in to the webgui?

What I would like to do is
start a VM in ESXI and this should send the signal to the CSE-PTJBOD-CB3 to turn it on, so when the VM is booted up the disks in the jbod are spun up and the vm can use those.

And the other way arround. Power down VM, wait 20 seconds, power off jbod.

Anyone any idea?

 

[Yarik Dot]

I would try:
ipmitool -I lanplus -H ... -U .... -P .... -L ... power on
-H hostname/ip
-U username (ADMIN)
-P password (ADMIN)
-L Privilege level (ADMINISTRATOR for ADMIN)

 

[Patrick]

Yea ipmitool would be what I would try first.

Also there are some slightly different versions of ipmitool (e.g. windows I have seen around) so if what @Yarik Dot posted does not work, a quick doc check will likely get you what you need.

 

[Socrates]

thanks. this was helpful.