Having issues with a Connectx 3 EN single port that will not link. 10gb modules are Mellanox and work in my network switches.
Windows 10 client loads the drivers for the card and assigns a default IP.
Proved cables operational, PCI-e port operational by using a NIC card, 10gb modules operational.
Driver under system devices set to ETH. Other radio buttons grayed out.
Both Mellanox and Microsoft drivers do the same thing. Card installed but will not link/connect.
I have now tried 4 different Connectx 3 EN single port cards and 4 different Connectx 2 EN single port cards without success on 3 different motherboards.
Ideas?
Windows 10 client loads the drivers for the card and assigns a default IP.
Proved cables operational, PCI-e port operational by using a NIC card, 10gb modules operational.
Driver under system devices set to ETH. Other radio buttons grayed out.
Both Mellanox and Microsoft drivers do the same thing. Card installed but will not link/connect.
I have now tried 4 different Connectx 3 EN single port cards and 4 different Connectx 2 EN single port cards without success on 3 different motherboards.
Ideas?