I have 2 LSI cards in my HP ML350P GEN8 - an HP H220 (9207-8i) and an LSI 9286CV-8e. The HP220 is in IT mode, but fully flashed - bios, UEFI bios, ROM, etc. When both are installed, I only get a prompt at boot to enter the bios for the 9286, and I can't boot to anything attached to the 9207. If I disable the 9286 in the bios, I can enter the bios for the 9207 and boot to it. Obviously there is a conflict between the two, but is there a workaround? I can move to an HP H922 and use the internal and external ports, but I'd really like to find a solution to the current issue. Thanks!
Tim
Tim