Hmmmm, all are x10 MB's. So other than via ipmiview, how can I use KVM?which motherboard? I didnt think IPMIView worked with the HTML5 motherboards (X10/H10+).
How?Any particular reason why u cant use the HTML5 option?
I don't think KVM has ever worked on the X10 boards. I just updated the BIOS and Firmware on a X10SRL-F hoping I could then connect via HTML5 but alas, no joy. I did run into a slew of strange problems like I could not get ipmi to save any settings and Windows would not boot but I was able to resolve those issues (I hope). I read somewhere here about problems with the 3.4 BIOS, don't remember which tho but I'm going to research before upgrading my 2 X10SRH-CF. I'll keep plugging away at it till I either resolve it or brick a board or two.Did you change anything in the bios? Maybe do a reset to defaults or even CMOS reset..
It sound as if both ways have the same issue - did this use to work?
I think it has something to do with HTML5.Whenever you resolve your connectivity problem it might be that both ways of access will be working again.
Have not used IPMIView in years but ti *should* work with X10's too (" IPMIView V2.0 supports Supermicro’s BMCs that adheres to either IPMI v1.5 or v2.0. ")
Now the issue with X10 boards must be one of yours since this is working fine on my boards.
Edit - Tried ipmiview on mine but its not even opening the KVM window... no error, nothing.
Sorry not keen on debugging that at this point :/
But - thanks for getting me to try IPMIVierw, since i found its a simple way to update the FRU information which is not possible on the BMC interface
Yep, I can connect using ipmi and everything works except KVM. I think I read somewhere that x10 boards use HTML5 and ipmiview isn't compatible with HTML5. After reading this I decided attempt to connect view ipmi web interface. Under Remote Control there is iKVM/HTML5. My X10SRL-F has this option grayed out and My X10SRH-CF boards return "Connection Failed. I've tried several different browsers and get the same with all of them.So, can you connect to the box in IPMIView? and you can login? Or where do you get the can't connect? KVM Console only?
But the same user is not working on Web Interface?
Not sure why KVM over IPMIView is not working for me, it opens stunnel just fine.