Hey,
so I have just some basic questions about using Omni-OS. I am pretty familiar with where things are in both Linux and FreeBSD, but it's just a little different on Solarish OS and I'm trying to wrap my head around it but not finding many resources.
1) How does one use the scrollback buffer when viewing the TTY?
Edit: And can I switch between TTYs like on BSD/Linux somehow? I tried ctrl-alt-fkeys and alt-fkeys and neither switched anything.
2) I have a mis-named network device that shows up during startup (accidentally forgot one zero in e1000g0). Presumably I made this mis-configuration with ipadm, but in ipadm the misnamed interface does not show up using either show-if or show-addr. Where else might it be coming from?
3) Is anyone else who's using Omni-OS on ESXi having issues where the screen echos after a command has already been run? It's responding to the keyboard, but I can't tell what I've typed until after I hit enter.
4) After reboot, I can't seem to log into the VM using SSH, when it was working before reboot. Is there some kind of persistence I need to set for the SSH service, or is there a firewall blocking the port now? I am pretty sure I turned it on in Napp-It (which is also now not working)
edit: I ran 'svcs | grep ssh' and got 'online 00:08:43 svc:/network/ssh:default' so it looks like it should be working AFAIK ...
5) Napp-it -I had reboot it before and it was running after startup, but now it either isn't running or is blocked upon startup after most recent reboot. Perplexing.
Edit: I logged into Napp-It using an e1000 IP and it says the externam vmxnet3 interface is disabled? Any idea why that would happen?
# ipadm show-if says:
During startup I noticed:
Thanks
so I have just some basic questions about using Omni-OS. I am pretty familiar with where things are in both Linux and FreeBSD, but it's just a little different on Solarish OS and I'm trying to wrap my head around it but not finding many resources.
1) How does one use the scrollback buffer when viewing the TTY?
Edit: And can I switch between TTYs like on BSD/Linux somehow? I tried ctrl-alt-fkeys and alt-fkeys and neither switched anything.
2) I have a mis-named network device that shows up during startup (accidentally forgot one zero in e1000g0). Presumably I made this mis-configuration with ipadm, but in ipadm the misnamed interface does not show up using either show-if or show-addr. Where else might it be coming from?
3) Is anyone else who's using Omni-OS on ESXi having issues where the screen echos after a command has already been run? It's responding to the keyboard, but I can't tell what I've typed until after I hit enter.
4) After reboot, I can't seem to log into the VM using SSH, when it was working before reboot. Is there some kind of persistence I need to set for the SSH service, or is there a firewall blocking the port now? I am pretty sure I turned it on in Napp-It (which is also now not working)
edit: I ran 'svcs | grep ssh' and got 'online 00:08:43 svc:/network/ssh:default' so it looks like it should be working AFAIK ...
5) Napp-it -
Edit: I logged into Napp-It using an e1000 IP and it says the externam vmxnet3 interface is disabled? Any idea why that would happen?
# ipadm show-if says:
Code:
IFNAME STATE CURRENT PERSISTENT
lo0 ok -m-v------46 ---
vmxnet3s0 down bm--------4- -46
vmxnet3s1 ok bm--------46 -46
e1000g0 ok bm--------46 -46
Code:
Unable to plumb vmxnet3s0
. . .
Failed to configure IPv4 interface(s): vmxnet3s0
Last edited: