I don't have the ability to update the BMC firmware. It should be under maintenance according to the manual. But it's not present.
![1676159590753.png 1676159590753.png](https://forums.servethehome.com/data/attachments/27/27136-e236e0e064e4cb3ca89d9185ce47e557.jpg)
This is a Datto server that has a (modified?) ASRock Rack D2143D8UM motherboard.
I would like to put the original ASRock firmware on it because I don't have Fan Control through the IPMI interface and I'm hoping flashing the original ASRock firmware might fix this. I also have a bug where the DDR4 temperature sensors go in the red reporting 255℃ when I ran PassMark MemTest86
Is this even possible? If so, is it safe to update the BIOS and/or BMC firmware because it's a Datto branded server?
This is the information I see on my Dashboard
![1676159836700.png 1676159836700.png](https://forums.servethehome.com/data/attachments/27/27137-7e066c76b1db6ae7157dd2cf00b8fa0e.jpg)
![1676159590753.png 1676159590753.png](https://forums.servethehome.com/data/attachments/27/27136-e236e0e064e4cb3ca89d9185ce47e557.jpg)
This is a Datto server that has a (modified?) ASRock Rack D2143D8UM motherboard.
I would like to put the original ASRock firmware on it because I don't have Fan Control through the IPMI interface and I'm hoping flashing the original ASRock firmware might fix this. I also have a bug where the DDR4 temperature sensors go in the red reporting 255℃ when I ran PassMark MemTest86
Is this even possible? If so, is it safe to update the BIOS and/or BMC firmware because it's a Datto branded server?
This is the information I see on my Dashboard
![1676159836700.png 1676159836700.png](https://forums.servethehome.com/data/attachments/27/27137-7e066c76b1db6ae7157dd2cf00b8fa0e.jpg)