Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
Just gotten around to configuring the switch and installing it in the rack. It's only been up for about an hour and half, currently the temp is around 38-40C mark. (I haven't hooked up all the servers etc yet as I have to find all the OM4 cables, transceivers etc)
As for the fans, they are all at 60%, one running at 58% however they are configured to run at 61%. Not sure if this is the information you were looking for, but if you want me to testing something, just let me know. If the fan speeds change, I will let you know. (Currently, all temps are way below the set points)
Has anyone with a 2GB QX-32 non-S version installed either a bigger DOM or done the USB mod, and had the switch recognise the additional capacity properly, beyond what fdisk et al can see?
When I was trying to update EOS, it told me to use the 2GB flavour otherwise things wouldn't work, despite having a 64G USB stick in there, formatted in aboot to use the whole thing.
The 2GB flavour of EOS has been working fine, but I've been hoping to put SONiC onto it.
However, every time I've tried, regardless of which branch I use a build from, it has issues with
It boots to SONiC, then after maybe 10 minutes, it fails with this output and restarts.
When I was trying to update EOS, it told me to use the 2GB flavour otherwise things wouldn't work, despite having a 64G USB stick in there, formatted in aboot to use the whole thing.
The 2GB flavour of EOS has been working fine, but I've been hoping to put SONiC onto it.
However, every time I've tried, regardless of which branch I use a build from, it has issues with
getPrefdlCls and readI2cPrefdlEeprom and can never seem to hook into the switch hardware.It boots to SONiC, then after maybe 10 minutes, it fails with this output and restarts.