Anyone confirm getting Rev. 2 EPYC 7002 Boards?

IamSpartacus

Well-Known Member
Mar 14, 2016
2,298
553
113
I just got Superbiiz to confirm the Rev. they have in stock (at least the one they are sending me):

 

TXAG26

Active Member
Aug 2, 2016
274
81
28
Patrick, any word from Supermicro about new AMD Epyc 7002 single socket boards with PCIe v4.0?
 
Last edited:

Jeff Robertson

Active Member
Oct 18, 2016
421
113
43
Chico, CA
Patrick, any word from Supermicro about new AMD Epyc 7002 single socket boards with PCIe v4.0?
I'm waiting as well, I keep refreshing their website hoping for more than 4 h12 boards. I think they should be arriving within the next month or two, I would love to get confirmation though.
 

am45931472

Member
Feb 26, 2019
75
17
8
I just got Superbiiz to confirm the Rev. they have in stock (at least the one they are sending me):

Think you can hook up a pci e 4.0 device to thoes slots and test and verrify their link speed? The supermicro site doesnt list pci e 4.0 support on that board, even though they do list epyc 7002 support.

its possible supermicro will update their product page at some point.
 

IamSpartacus

Well-Known Member
Mar 14, 2016
2,298
553
113
Think you can hook up a pci e 4.0 device to thoes slots and test and verrify their link speed? The supermicro site doesnt list pci e 4.0 support on that board, even though they do list epyc 7002 support.

its possible supermicro will update their product page at some point.
I dont own any PCIe 4.0 devices unfortunately.
 

IamSpartacus

Well-Known Member
Mar 14, 2016
2,298
553
113
Looking to upgrade the unRaid server again?
Yes sir. Pairing this board with an EPYC 7302P to replace my current dual E5-2680 v3 setup. Just don't need the core count anymore with HW transcoding and looking for more power efficiency with a higher base clock for a few VMs. Power ain't cheap by me as you can see.

 

Geran

Active Member
Oct 25, 2016
323
61
28
36
I'm surprised you went with EPYC over something like the E-2176g, also that dashboard is great I need to do something like that myself.
 

IamSpartacus

Well-Known Member
Mar 14, 2016
2,298
553
113
I'm surprised you went with EPYC over something like the E-2176g, also that dashboard is great I need to do something like that myself.
I'm coming from dual E5-2680 v3's so 24c/48t. When I said I don't the high core count, I didn't mean I can go THAT low. My daily driver VM alone uses 8 threads :D. Besides, the onboard iGPU on the Xeon E-2100 series would be wasted in my case as I'm using an Nvidia GPU for HW transcoding.
 

Geran

Active Member
Oct 25, 2016
323
61
28
36
I'm coming from dual E5-2680 v3's so 24c/48t. When I said I don't the high core count, I didn't mean I can go THAT low. My daily driver VM alone uses 8 threads :D. Besides, the onboard iGPU on the Xeon E-2100 series would be wasted in my case as I'm using an Nvidia GPU for HW transcoding.
Oh okay, makes more sense :).

Is it okay if I PM you about that dashboard?
 

IamSpartacus

Well-Known Member
Mar 14, 2016
2,298
553
113
Neat dashboard. Do you have a link to more information about it?
The front end dashboard is Grafana. It uses a backend of telegraf (the data collector) and InfluxDB (the database used to store the data). Thus I use a stack of 3 different docker containers (grafana, telegraf, influxdb). I also use another container called Varken which is similar to telegraf in that it's a data collector but specifically for Plex.

 

IamSpartacus

Well-Known Member
Mar 14, 2016
2,298
553
113
Last edited: