Well I've got a question on this as well - need some help
- I tried to remove the TQ from my 836 a while ago and for some reason the backplane seemed to be 'stuck' in place even after remove the screws
. From what I was able to deduce is that after I remove the top 3 screws, I should be able 'lift' the backplane a bit and it should come loose - I tried that but the backplane did not budge at all. I tried to put as much pressure as I could without breaking it and it just won't move. So I gave up. I really want to put a SAS2-836EL1 / 2 and remove the expander I have installed in my system.
So what am I missing here. I've tried to googling for this and have not found any details.
Would really appreciate some help here
.