Supermicro x9drg-qf bios 3.0 (new enough to support v2)
I was stoked. I've been running a borrowed single Cpu waiting for these.
I swapped in the first Cpu into CPU1
Woo hoo! Everything checked out in bios.
I plugged in the second Cpu.. shit, ****. No little green power light, no ipmi, no post, fan spins, fan stops.
Tried putting the 2nd Cpu int CPU1. Works like a dream... So both CPUs are good. All my RAM works in CPU1.
Tried with and without RAM on CPU2.
No nothing....
Am I missing a jumper/bios/ipmi setting or is it likely I have a dud board?
thanks as always... soon to be swapping to my 4rth board on this build.
I was stoked. I've been running a borrowed single Cpu waiting for these.
I swapped in the first Cpu into CPU1
Woo hoo! Everything checked out in bios.
I plugged in the second Cpu.. shit, ****. No little green power light, no ipmi, no post, fan spins, fan stops.
Tried putting the 2nd Cpu int CPU1. Works like a dream... So both CPUs are good. All my RAM works in CPU1.
Tried with and without RAM on CPU2.
No nothing....
Am I missing a jumper/bios/ipmi setting or is it likely I have a dud board?
thanks as always... soon to be swapping to my 4rth board on this build.