Environment:
UPLINK1: 5Gbit Uplink, Input is is a 10GBASE-T copper link from the Fiber drop, into SFP+ Port1 on router below
Router1: Opnsense w/ Mellanox ConnectX-4 (Dual SFP+)
-SFP+ Port1: 10GBASE-T Copper SFP+ : https://www.amazon.com/10Gtek-SFP-10G-T-S-Compatible-10GBase-T-Transceiver/dp/B01KFBFL16
-SFP+ Port2: 10 : 10G SFP+ TwinAX DAC: https://www.amazon.com/10G-SFP-DAC-Cable-SFP-H10GB-CU2M/dp/B00WHS3NCA?th=1
Switch1: Brocade 6450-48P
-48 POE+ 1GBE (Rest of Network)
-4 SFP+ 10GBE
-10G Twinax DAC from Router1: SFP+ Port2
-10G Link to NAS1 (undetermined)
-10G Link to PROC1 (undetermined)
-10G Link to DESK1 (undetermined)
NAS1: Unraid with Mellanox ConnectX-4 (Dual SFP+)
PROC1: Debian with Mellanox ConnectX-4 (Dual SFP+)
DESK1: Windows with Mellanox ConnectX-4 (Dual SFP+)
Quick sanity check on my NIC card choices, etc would be welcomed. Obviously im trying to limit 10GBASE-T as much as possible, but it is required from the ISP.
UPLINK1: 5Gbit Uplink, Input is is a 10GBASE-T copper link from the Fiber drop, into SFP+ Port1 on router below
Router1: Opnsense w/ Mellanox ConnectX-4 (Dual SFP+)
-SFP+ Port1: 10GBASE-T Copper SFP+ : https://www.amazon.com/10Gtek-SFP-10G-T-S-Compatible-10GBase-T-Transceiver/dp/B01KFBFL16
-SFP+ Port2: 10 : 10G SFP+ TwinAX DAC: https://www.amazon.com/10G-SFP-DAC-Cable-SFP-H10GB-CU2M/dp/B00WHS3NCA?th=1
Switch1: Brocade 6450-48P
-48 POE+ 1GBE (Rest of Network)
-4 SFP+ 10GBE
-10G Twinax DAC from Router1: SFP+ Port2
-10G Link to NAS1 (undetermined)
-10G Link to PROC1 (undetermined)
-10G Link to DESK1 (undetermined)
NAS1: Unraid with Mellanox ConnectX-4 (Dual SFP+)
PROC1: Debian with Mellanox ConnectX-4 (Dual SFP+)
DESK1: Windows with Mellanox ConnectX-4 (Dual SFP+)
Quick sanity check on my NIC card choices, etc would be welcomed. Obviously im trying to limit 10GBASE-T as much as possible, but it is required from the ISP.