I have for sale HP C7000 Bladecenters with BL465 G7 and BL685 G7 blades. These blades have AMD Opteron 6174 chips installed however I have AMD Opteron 6276 chips for these blades included. There is no ram or hard drives.
A bit more info. I have 16 of these chassis, I have enough blades to...
Hi,
First time posting a FS listing. I pulled this motherboard from a Supermicro CSE-745. The board looks good. Attached is the Sensor screen from the IPMI UI, unfortunately I don't have any Opteron CPUs to run it with. It looks good, no bent pins in the sockets that I see. Because of...
Hi everyone.
I have a SuperMicro H8DGU-F board, dual socket AMD G34 board.
Basically all the parts from this setup were from eBay, and everything worked until I tried to change out the CPUs.
Specs
CPUS : 2x AMD Opteron 6274 [not functioning] (Previously was working with 2x AMD Opteron 6172)...
i have two H8DGU and one H8DGU-F servers with dual Opteron 6276 CPUs. the H8DGU-F has the 1U version heatsinks and the H8DGUs have 2Us. 2GB DDR3 ECC(1GB sticks) per CPU. PSUs are included. each has fans if wanted. looking for $175 shipped/each OBO. can work something out for the lot.
i have 4...
Update: I'm also in the market for small-sized DDR3 ECC RAM - 2-4GB modules are fine, and low voltage or low profile preferred but not required.
I got my hands on a c7000 blade chassis and I'd like to fill it full of Opterons. If you have a surplus of unwanted, sad Gen 7 or 8 Opteron blades...
Everything in excellent/as-new condition.
0 - SSD
Crucial MX300 1TB M.2 (SATA) -- £200 inc European shipping
Boxed, as-new physically. Been used as the main drive in my Mum's laptop for around 1yr.
SMART data here: mx300_1tb_m2 · GitHub
Photos here...
Hi guys,
I'm looking for an Opteron socket F motherboard for a pet project with the following specifications:
- two CPU sockets
- support for 2400 series Opterons
- ATX, EATX or SSI CEB/EEB formfactor
- at least one physical PCIe x16 slot
- AMD or Nvidia chipset
- BIOS support for "node...
Hi all,
i've posted this initially on bitcointalk and got redirected here so i guess you guys are the experts for monero...
I have received 2 of these machines,
CPU: 2x AMD Opteron 6174 12-Core 2.2 GHz (2x 6 MB Cache, 6.4 GT/s, AMD-V)
RAM: 16 GB RAM
HDD: 2x 146 GB SAS Hot Swap 2.5"...
I'm searching for Dual Opteron boards with 2x Socket F which should support 2400 series Opterons (Istanbul). On Ebay I can't find useful material, because the boards are either MSI K9ND Speedster2 which don't support 2400 series Opterons, or they are OEM boards where I can't find any...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.