minisas

  1. T

    Intel S2600WT Nvme SSD setup (m.2 via PCIe Riser card and other possibilities)

    Hello everyone, I just got an Intel S2600WT (WTTR) based server and am missing only storage to set it up and running. I am searching for the best speed option for storage so I was looking into how to setup m.2 Nvme SSD (no raid needed). No m.2 ports on board, I have 2 PCIe riser cards with 5...
  2. L

    slimsas, minisas, oculink, omg

    Hello everyone, just registered and this is my first post :) I'm venturing into the beauty of housing my servers. I'm considering this motherboard: Supermicro H12SSL-i (H12SSL-i | Motherboards | Super Micro Computer, Inc.) with this chassis: IW-RS108-07 (1U Rackmount Chassis / InWin /...
  3. M

    Pin config issues on U.2 ports to NVMe M.2 IcyDock cage

    I've recently purchased a Gigabyte MZ72-HBO mobo and there are two U.2 NVMe (#38 & #39 on the board diagram in the user manual) ports attached to the CPU0. Rather naively, I assumed this meant that I could connect a SlimSAS to MiniSAS cable and run the Icy Dock MB720M2K-B 4x M.2 NVMe cage out...
  4. P

    Asus WS C422 SAGE 10G - U.2-Port to MiniSAS-HD possible ?

    Hi all, I've found the following mainboard: Asus WS C422 SAGE 10G It has 8 SATA-ports and two U.2-ports with SFF 8643 connectors. In two 5.25" slots of the chassis I want to use an ICY DOC bay for up to 8x 2,5" SATA-SSDs. (ToughArmor MB508SP-B). This bay has 2x miniSAS HD (SFF-8643) ports. In...
Top Bottom