juniper

Hi everyone, I added a Juniper EX3400 to my home lab yesterday and have been struggling to update the firmware. I have tried many times to create an account on Juniper with little success. I have searched everywhere but cannot find this update. I hope someone has a copy of the latest JunOS...

Hello friends! I am trying to configure LACP between my Juniper SRX240 (JunOS 12.3) and Quanta LB6M. So far, I'm stuck. Let me show you my current configuration on both devices. Quanta LB6M configuration interface 0/25 addport 1/1 exit interface 0/26 addport 1/1 exit interface 0/27 addport...

Hi All looking for a copy of Junos EX4300 17.1R2 so i can update to 19 from 14 can anyone assist me with this struggling to find a copy

Hi all, First post and sale - came recommended by a like-minded soul and avid lurker. For sale is: 3x Juniper EX3300-24T 4x10G SFP+ with DC PSU, pulled and well working from a D/C-environment. 4x 10G SFP+ uplink ports + 24x1G, power draw approx. ~50W with very silent (smooth) operation. All...

Good morning, I was wondering if anyone could assist me please. I'm hoping one of you will be able to point me in the right direction or send me a Quality Control Checklist for an SRX 345 specifically. Though, it does not have to be specifically needed for an SRX just a Hardware Quality...

I am at a loss, I recently bought a switch (EX4200-24T) Second hand from amazon, however at some point during setup one of my config files was corrupted and now the only way to fix this is a format with a new OS install, Juniper support is trying to force me to buy a 1000$ support contract in...

Hi all: Got a hold of a Juniper SRX300 and pretty much everything I need, but I can't figure out how to configure it to establish a tunnel to NordVPN. I have this working on an Edgerouter (it's basically stock openvpn) but the SRX is a bit intimidating compared to what I'm used too. Anyone...

Hey Everyone, I'm hoping to gather some opinions / experience for or against replacing my Watchguard XTM5 running pfSense with a Juniper SRX345. I'm sure some of you are running a combo of these at home and work. What pain points would I have? Some considerations, - SRX345 has no active...

Hello! I have a Juniper EX4200 Series switch that I am setting up in a home lab and am looking for some help updating the firmware. I currently have Version 12.3R12.4 and would like to upgrade to 15.1R7. I don't know the upgrade path however. Also I am not sure how to download the files from...

Hi everyone, Can someone help me with the image software for an old Juniper NS5400 Firewall with the last or our best version +v6.2 and the load checker because I can't load with no corporative email. Best regards

Hello guys, I am new to VM and especially server hardware. I am planning to build a home lab server (ESXi) that is quiet and small because I am going to have this in my room. I am going to be using this for Cisco, Juniper, Palo Alto labs, and some Linux and Windows VMs to function as servers...

I put these up on eBay but figured someone here might be interested. I've got two Juniper NS-5400 equipped as follows: NS-5000-MGT3 NS-5000-2XGE-G4 2x NS-5000-8G2-G4 3x 150w PSU That's 2x 10GbE XFP and 16x GbE SFP ports. According to the data sheet they firewall at up to 30Gb/s, VPN / IPSec at...

Anybody know what kind of RAM goes in a Netscreen 5400? I've got NS-5000-MGT3, NS-5000-8G2-G4, and NS-5000-2XGE-G4 modules with no RAM :-( The MGT takes some kind of DIMM, the others are SO-DIMM. All I've got lying around is DDR3 and that ain't it.

Will be moving in a few months and will be selling these items. My preference for payment will be thru Paypal Only. I can ship throughout the US fine. International shipping will need to be discussed. All items are in working condition and will be tested again before shipment just to be sure...