it mode

  1. K

    Disable SBR loading jumper on M5110?

    I'm trying to flash an IBM M5110 card to IT mode but the controller is not detected by megarec. I have been following this guide: Cross-Flash IBM ServRAID M5110 and H1110 to IT HBA Mode – an Ephemeral Memoir of the Lazy Mocha supplemented with the three other guides linked in it (the guide skips...
  2. T

    HBA/IT controller

    Hello, I am currently working on building a system. I have 6 18TB SAS drives. My current Adaptec 7 card only shows them at 16 TB which I believe is causing all my errors I am seeing on my ZFS. I have tried with and without the memory card that comes with the Adaptec 7 card. I have a very...
  3. F

    Install additional RAID Controller for TrueNas Dell R720

    Hi, I already have a built-in H310 mini controller that came with the Dell R720 server. It was flashed in IT mode and working as expected. Now I wish to install TrueNas VM using proxmox and I can't pass this as is because I have my SSDs connected to it as well which form the ZFS pool for VMs...
  4. B

    Lenovo LSI 9240-8i: Failed to Validate Mfg Page 2

    I've been racking my brain on this all day. I followed the steps in this thread and got stuck on step 14. I get this output: fs0:\> sas2flash.efi -c 0 -list LSI Corporation SAS2 Flash Utility Version 20.00.00.00 (2014.09.18) Copyright (c) 2008-2014 LSI Corporation. All rights reserved...
  5. 3

    LSI SAS 3008 On Gigabyte MD70-HB0

    I have a Gigabyte 12bay server (believe the model is R270-R3C) with a Gigabyte MD70-HB0 motherboard inside. I’m aiming to use for FreeNAS and as such looking to flash the LSI SAS 3008 controller to IT mode. Has anyone done this on this motherboard, or are there any how to guides I can follow...
  6. Z

    Finishing New Server Build : Time for SAS HBA IT mode card

    Hi, I'm in the process of finishing a new server build for proxmox virtualization. The system is running memtest to check if I'm safe with those memory sticks, and so far so good, finishing 7th pass with 0 errors so far. At the moment, my new server build goes like this: - motherboard...
  7. J

    IBM M1115 Flash To IT Mode

    I recently purchased one of these from ebay and tested it before attempting to flash and it works with its stock firmware. So I then did some research to see if I could follow a tutorial to flash a IBM M0115 and yes. Others have had success following the M0115 to flash the M1115. So I followed...
  8. S

    Cross flash M5015

    I would like to flash my M5015 to IT mode so I can use it in my freenas machine. I don't have a probable with using the flash tools and I have found guides for it, I just couldn't find recent reliable information about which exact files I need to flash. I found several guides from ~5 years ago...
  9. D

    Reverting LSI 9212-4i to IR mode?

    I want to revert an LSI 9212-4i I bought used to its factory defaults, so I can create a hardware RAID-1 on it. It is currently in HBA/IT mode, and I would like to get it back to a raid card. All the guides I find online are IR to IT, and I can't find the firmware downloads anywhere. Any...
  10. T

    LSI 9270-8i IT mode

    Sorry if this has already been answered elsewhere. I did a forum search but couldn't find exactly what I was looking for. I have a client with an LSI 9270-8i, with 8 drives currently connected. No RAID, just pass-thru to the OS (currently Server 2012 R2). This works fine for their current...