As far as I can see looking at the manual X10DRU-i+ | Motherboards | Products | Super Micro Computer, Inc.
My 16x16 2133p DDR4 memory should stay at 2133p? It is a v4 CPU
I have tried changing memory speed in BIOS, made no difference.
To confirm I am using the following slots
Got an issue with one of these currently don't think it's a Linux firmware issue I did not upgrade. Since last reboot I am getting error, just to be sure I did upgrade to latest Promxox pve-manager/8.1.4 which should detect both. Booting gparted ISO also does not detect it.
Jan 31 15:57:03...
Got a Eaton EMA114-10 setup in a data center they are having trouble factory resting it.
They're able to connect via serial, press and release the reset button on the PDU whilst pressing ESC key several times and a promopt (=>) appears, then execute "Defaults" after it just asks to login and...
Anyone know where I can buy Supermicro H13SAE-MF in UK. Don't want to pay import tax from other EU countries.
Can only find AS -1015A-MT | 1U | A+ Server | Products | Supermicro but only want the MB
So I am looking at two different memory types 2Rx4 & 4Rx4 for my system with an AMD Milan and MZ32-AR0
https://www.gigabyte.com/Enterprise/Server-Motherboard/MZ32-AR0-rev-30
HMAA8GL7CPR4N-WM HMAA8GL7CPR4N-WM - SK Hynix 1x 64GB DDR4-2933 LRDIMM PC4-23466U-L Quad Rank x4 Module
HMAA8GR7MJR4N-WM...
2x 6650 2x PSU (one has damage on port 1/2 but both work)
£480 (will take £450 for damaged one)
6610-48 £105
6450-24 £100
6450-24P £100
CRS226-24G-2S+RM (Port 17 does not work) £75 (comes with power cable)
I also have a 6450-48P that does not reach post boot can let that go for £40...
Anyone know how these perform against each-other? Looks like a few cheap ones popped up on ebay (PM1735) been happy with the P4608, PM1735 seem even better on datasheet. Both 6.4TB
I can seem to get the 7B12 for close to $300 cheaper. Other than the slight TDP (240 vs 220) what pros/cons does the 7742 have?
Dual 7B12 seem to work better than dual 7742 but I can't find any benchmarks for single sockets
Would it be possible for me to fit a H12SSW-AN6 into a standard chassis like Supermicro 826. The issue is the two PSU ports on the motherboard I beleive I only need to power one of them (with what?)?
I am having trouble finding a place I can find a chassis for my planned system that will be using MZ32-AR0 motherboard. I can only seem to find R272-Z32 that official supports it and where I find these online they always want to sell the full system not barebone.
I wont be needing the whole 24...
I purchased some very cheap ORACLE 7332759 10TB off Ebay I am worried they maybe vendor locked? (proprietary firmware) how can I go about testing these for that? Right now they are plugged into a SAS826TQ backplane + Adaptec ASR71605 and they seem to be working so is that a no?
https://www.ebay.co.uk/itm/115711066557?hash=item1af0eac1bd:g:ed0AAOSwO0lj362v
Probably sell for less than $1800 seems like a good deal what you think?
He previously sold "Job Lot 50 x Samsung 32GB M393A4K0BB1 ECC DDR4 PC4-2400T Memory RAM Module" for £1,001.00
I have an issue with my router having significantly better speeds than my Brocade ICX6650 switch. Router > 1/1/41. iperf3 onto the router reaches full 10G speeds. What could the issue be?
root@router:~$ iperf3 -c lon.speedtest.clouvider.net -p 5205
Connecting to host...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.