Search results

I try to website and chat with their support. they could help to send me back my icx switch 10g port license.

I suggest get HPE DL20 Gen10 or MicroServer Gen10 Plus

so great! new microserver gen10 plus in the DHL packets.

C:\Users\Administrator\Downloads\hpcx3>flint -d mt4099_pci_cr0 query Image type: FS2 FW Version: 2.40.5000 FW Release Date: 27.10.2016 Rom Info: version_id=0 type=CLP Device ID: 4099 Description: Node Port1...

I get a used HDD HGST HUS726060AL5210 with fw ver :A519. No smart info. I search forums and cisco website or supermirco web. I get the least ver fw ADD5.bin First I use LSI 9400 HBA card and windows server OS storcli64 command to update the HDD fw follow by cisco website hdd fw upgrade guide...

Thanks~

run storcli /c0 show ,check card info version

I get a used hus726060al5210 SAS HDD , but fw only 0519, couldn't read smart info , could you share the fw again. The gofile link show no file.

I only have the current fw from nvidia website. https://www.mellanox.com/support/firmware/connectx3en

I export the config ini from the CX3 682625-001 card, and use it create new bin file with 2.40.5000 fw , so I could flash 2.10 to 2.40 fw to this card.

mst status MST devices: ------------ mt4099_pci_cr0 mt4099_pciconf0 1. Save basic info such as GUIDs, MACs, etc.: Code: flint -d <device> query full > flint_query.txt 2. Save low-level flash chip info: Code: flint -d...

nice thing. But I just get new HPE server with FLOM slot and 10G 560FLR card~!

I get new toy is the HP CX3 FLOM card, it was from HPE Gen8 server. I put it in the my homelab DL20 G10 unit flom slot, it show up and fw current is 2.10.2350, I check the Mellanox website the MCX311 or MCX341 fw is 2.42.5000. I try to update fw ,but I search this part model from...

when you use the E3 cpu, it should work with ECC only memory. not the Reg-ECC memory. not RD LD memory normally the memory lab will end like ED2 ,EE1 . Reg-ECC memory end with RD1 RD2

to add nvme to DL20 gen10 , you could direct insert nvme m.2 card to m2 slot. it was option direct use the m2 slot to install nvme card only or use other ILO+COM+nvme 3to1 card. I use 4sff mode Gen10

After know the issue, I create a empty all 00 sbr file to 512 byte, megarec -writesbr 0 emtpy512.sbr megarec -cleanflash 0 reboot pc megarec -writesbr 0 nec9267sbr.bak I try directly flash 8mb nec fw , it doesn't work . you will need 16mb 2208_16 recovery file megarec -m0flash 2208_16.rom...

I findout the reason is I try use someone smc2208 sbr , that was a 512 byte. I backup my NEC LSI 9267 SBR only 256 byte, so when I flash the smc2208 sbr, it may write out range SBR eeprom area, and broken some thing...

9260 is raid card with raid mode and cache memory. Jbod disk need use HBA card ,

I know P840/P440 could use HPE SSA tool to set to HBA mode. P812 is too old card.

Poster have '24 bay server cases and put my existing media server'，it not for move data between them...