Well, I bit the bullet. I now potentially have upwards of 600mbps/20mbps for an Internet connection with Comcast's XT-6 Modem Router Gateway as part of the package deal at roughly the $60 (USD) mark last month.
I use (and have used) Netgear Nighthawk Router (of the minimal marketing terms...
err, never mind, it seems trying to create an aggr/bonded link with OmniOSce creates some kind of Loopback condition on the trunk link(s), thus preventing the aggr/bonded link from getting an IP address, unless it's back to the inferior consumer networking hardware?!?
meanwhile, the vmxnet3...
Hello,
Effectively a repost (if I can remove the other one). I don't want to rework everything, but I also have no qualms about ripping everything out to rebuild and configure everything (ESXi 6.7u3, Napp-It, etc.) with a clean slate.
The all Intel server (my ESXi box) has: effectively the...
ah, ok.. know anything creating a fatter pipe by aggregating link(s)? getting some strange behavior so far..
# dladm create-aggr -L active -l [e1000g0|] -l net1 aggr0
as an immediate response, I'm getting errors of a (paraphrased) 'Loopback condition on the trunk link' that just scrolls and...
(admins - please move as deemed appropraiate) so..with so many different changes happening all at once.. I figure this might be the best place for it..
I've had a cough for most of December, but it came to a nasty wretched head right during Christmas.. I thought I'd over it rather quickly, but...
Update: It seems Google Voice only works the OBIHAI OBi200 SOHO hardware device or through specific interfaces (Apps or Sites under Google's control). So using Google Voice in this manner has been dead for a while now, maybe 6-months. It's been well documented, or rather the documented methods...
@BoredSysadmin - horrible :confused: and shamefully hilarious! :D :rolleyes:
Just as bad as asking if the power in the neighborhood is out. o_O :rolleyes:
Disconnecting power from the wall or the back of the computer is virtually the same. No burnt/fried electronics smell (which is very...
Any off the self solutions to network over/across three blocks (under a 5 minute walk) from Point A to Point B?
I do have a few 150Mbps USB adapters, curious for a possible solution.
maybe a home brew mesh network using the Raspberry Pis
bringing this back to life... have an error with Napp-IT stating the ZFS pool can't be found and bascially no bootloader.. quick searches point to a shared drive cache sort of bug with an easy fix from mid-2017 as I recall.. now just need to restore this if I can..
sorry, figured this was the best spot for Windows 7 - been tasked with removing and disabling MS Live Messenger & MS Skype from Windows 7 for my father, something he manually closes at the moment -- never had this issue on my personal machines.. tried google already, but no dice so far with the...
So just how much power does the X8DA3 require? The modified PDU (on the 846) using either the 900w or the 1200W-SQ simply will not power the X8DA3.. so what gives?
little update is in order.. extracted the PSU from the former Core 2 Duo FreeNAS box.. o_O not what I wanted to do, but things are working so far.. so, how do I determine it's the 1) PSU or 2) the backplane that the drives attach to?? :confused::confused:
P.S.-- I appear to have Rev. 1.00 of...
after posting, I removed all of the sound items from device manager.. SRS did not come back, neither did the digital choppy "transformers" effects.. thanks..
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.