Khadgar's latest activity
-
KKhadgar replied to the thread Supermicro H12SSL-i and TP-Link TX401.I got my new 10G card in, and everything works well. Thanks for the help.
-
KKhadgar reacted to MountainBofh's post in the thread Supermicro H12SSL-i and TP-Link TX401 with
Like.
Make sure you have the newest bios for the board. Beyond that, maybe buy a cheap X520 based card and a SFP+ to RJ45 transceiver. I've... -
KIf you don't need 2.5G then an Intel X540-T1 is probably the cheapest reliable option for 10GBaseT. There's some chance of counterfeit...
-
KKhadgar replied to the thread Supermicro H12SSL-i and TP-Link TX401.I installed the latest bios for it as soon as I got it in. I'll try a X520 or X540 as you two suggested and see how it goes. Thanks for...
-
KI recently bought a Supermicro H12SSL-i and an EPYC 7402. Works great. The only problem is that I can't get a TP-Link TX401 card I...
-
KKhadgar replied to the thread Qotom Denverton fanless system with 4 SFP+.I'm having similar issues where normally I'd get around 1000/1000, but on one of my 10g SFP+ adapters I get 1000/25. The other one is...
-
KKhadgar reacted to Brent Geery's post in the thread Qotom Denverton fanless system with 4 SFP+ with Like.
Take another look at the BIOS settings. It's there. North Bridge chipset S3 power state or something like that. The BIOS option...
-
KKhadgar reacted to Brent Geery's post in the thread Qotom Denverton fanless system with 4 SFP+ with Like.
Ah, OK. Yeah, that's the one. Glad you found it! Why Power On or Last State isn't the default on a server device I'll never understand.
-
KKhadgar replied to the thread Qotom Denverton fanless system with 4 SFP+.Thanks for your help. I went digging for "S3" and found it in the South Bridge config. Here's a screenshot for others so they'll know...
-
-
KKhadgar replied to the thread Qotom Denverton fanless system with 4 SFP+.I also bought one of these almost exactly the same time you did. I found the thread where images were shared of where the jumper should...
