Recent content by hjfr

DFI, one MB: unavailable. Asrock, it’s a complete computer. iBase, i don’t know this.

"Ryzen embedded" is also vaporware, no ? I never seen any MB with Ryzen embedded V2000 on the market. Some "EPYC 3000" exist (Supermicro M11SDV but limited to 1 Gb network or one Asrock EPYC3251D4I-2T at ~1000€ o_O ) Like you say, maybe Ice Lake D or Ryzen embedded V3000 next year. Waiting.

No planned product line ? :confused: Which processor to use now to replace xeon d-1500 or atom c3000 for low power x86 nas/home server ? Atom c4000 will exist one day ?

No (4 x 1 Gb switch)

smnhdy> For the 2 Gb/s subscription with Orange, their LB5 router is necessary. It contains the ONT internaly. Fiber is connected directly to the LB5: No SFP-ONT (GPON SFP ONT) will be provided with the LB5. SFP-ONT is delivered only with the LB4. And the SFP-ONT is SFP not SFP+ (Sercomm...

New bios v2.1 and IPMI-BMC v3.86 available for Xeon-D 15xx motherboard (X10SDV-xx). No changelog found.

Dlink DGS-1510-28XMP ? (24 x 1Gb POE+ and 4 x SFP+)

This switch is very recent and seems to be very good: eight multigig (1G/2,5G/5G/10G) RJ45 ports + four combo (1G/10G) RJ45/SFP+ and dual power. - Some tests of power consumptions ? (60w max specified in datasheet) - Jumbo support ? You choose: SwOS or RouterOS

There is also an Epyc 3101 model (EPYC3101D4I-2T)

Chris230291> It's head parking ? For my IronWolf Pro, I used the Seagate tool "SeaChest_PowerChoice" to modify the EPC (Extended Power Conditions) settings. These drives have 4 powers saving mode (idle_a, idle_b, idle_c and standby_z). I increased the idle_b (head parking) timer and disabled...

What's the problem ? Do what is indicated in the manual : 24 pin or 8pin for powering the MB. I have a X10SDV-4C and same thing in the manual: 24 pin or 8pin. I use 24 pin only. It's allow various possibility of powering (standard ATX, 12v only, etc) for different installation environment.

Some news about AMD Epyc Embedded 3000 series motherboards ? I didn't find anything

You're right. Pci-e is also full duplex. Thx for correction. So, pci-e 2 4x port will be ok for one 10Gb port.

The NIC will negotiate at 10 Gb, no problem. There is no relation between NIC negotiation and pci-e speed. In theory, pci-e v2 speed is 4 Gb per lane. So for pci-e 2 4x : 16 Gb/s. A 10 Gb NIC at full speed (full duplex) requires 20 Gb/s bandwidth A speed test in one direction will problaby be...

New v2.0 bios available for Xeon-D 15xx motherboard (X10SDV). No changelog available for now.