Recent content by Egon

HP PN: 712384 32GB 1866MHz DDR3 ECC 4Rx4 LR-DIMM Samsung branded Max out your Gen8 HP servers to 768GB :) 14EUR/modules, more than 50 available, shipping to EU only.

From an unknown, maybe NetApp storage, only postage fee need to be paid. 16 pieces. Postage to EU around 30EUR.

Some note about this iron, some good, some not good: - works well with P-8124, 8171M cloud CPUs, but no CPU carrier added to the heatsink :( - only 2666MHz RAM or over is supported, can't work with 2133MHz - NVME OCP card missing, called CNVO124, very exotic, out of the box only 2 SATA drive...

Your welcome! We are here to help each other :)

Yes, I have! Check the mac address of IPMI, if it's garbage or non equal what"s in the mobo, can cause this. SM support will help, really, really helpful guys there! X11SPI-TF solution : You may use IPMICFG to set the IPMI MAC address to match the one on the sticker. IPMICFG -a (you ipmi mac...

FW updated to the latest? Latest fw 7.2 as I see you are 1.18 ??? Latest FW

Any price suggestions, if it's too much?

Yes, but the place of the arrival must be true :)

Q.C. PASS : Made in China ?? :) AD9361 Datasheet

Looking for PCIe SSD for trade these CPUs. I want to use as ZFS cache drive.

I try 8272cl but don't post in this machine too... :(

You have to do a VRM mod, RolloZ170 made a good guide how to do it. I do the same, and my dual 8272cl works in X11DPi-NT fine. Here : https://forums.servethehome.com/index.php?threads/intel-8124m-board-compatibility.29304/page-5#post-325634

You need narrow, I use this (SNK-P0070APS4): Supermicro Cooler should be enough at all and later if you switch to any powerful CPU. In 4U you have not enough airflow to use passive heatsink, i think.

5118 added

Another Cisco added Let me know if you have any suggestion...