smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.1-RELEASE-p7 amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke,
www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: HGST
Product: HUH721212AL4205
Revision: D630
Compliance: SPC-4
User Capacity: 12,000,138,625,024 bytes [12.0 TB]
Logical block size: 4096 bytes
LU is fully provisioned
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000cca2b093735c
Serial number:
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Wed Sep 20 17:09:44 2023 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
Read Cache is: Enabled
Writeback Cache is: Disabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Grown defects during certification <not available>
Total blocks reassigned during format <not available>
Total new blocks reassigned <not available>
Power on minutes since format <not available>
Current Drive Temperature: 51 C
Drive Trip Temperature: 85 C
Manufactured in week 07 of year 2022
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 2
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 4
Elements in grown defect list: 0
Vendor (Seagate Cache) information
Blocks sent to initiator = 4752045768704
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 0 39726 1260.168 0
write: 0 0 0 0 2234 24046.724 0
verify: 0 0 0 0 97 0.000 0
Non-medium error count: 0
Self-test execution status: 72% of test remaining
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background long Self test in progress ... - NOW - [- - -]
# 2 Background short Completed - 29 - [- - -]
Long (extended) Self-test duration: 65535 seconds [1092.2 minutes]
Background scan results log
Status: scan is active
Accumulated power on time, hours:minutes 46:02 [2762 minutes]
Number of background scans performed: 0, scan progress: 75.25%
Number of background medium scans performed: 0
Protocol Specific port log page for SAS SSP
relative target port id = 1
generation code = 1
number of phys = 1
phy identifier = 0
attached device type: SAS or SATA device
attached reason: loss of dword synchronization
reason: unknown
negotiated logical link rate: phy enabled; 12 Gbps
attached initiator port: ssp=1 stp=1 smp=1
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000cca2b093735d
attached SAS address = 0x56c92bf00046ec03
attached phy identifier = 2
Invalid DWORD count = 1
Running disparity error count = 1
Loss of DWORD synchronization = 0
Phy reset problem = 0
Phy event descriptors:
Invalid word count: 1
Running disparity error count: 1
Loss of dword synchronization count: 0
Phy reset problem count: 0
relative target port id = 2
generation code = 1
number of phys = 1
phy identifier = 1
attached device type: no device attached
attached reason: unknown
reason: power on
negotiated logical link rate: phy enabled; unknown
attached initiator port: ssp=0 stp=0 smp=0
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000cca2b093735e
attached SAS address = 0x0
attached phy identifier = 0
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization = 0
Phy reset problem = 0
Phy event descriptors:
Invalid word count: 0
Running disparity error count: 0
Loss of dword synchronization count: 0
Phy reset problem count: 0
=== START OF INFORMATION SECTION ===
Vendor: HGST
Product: HUH721212AL4205
Revision: D630
Compliance: SPC-4
User Capacity: 12,000,138,625,024 bytes [12.0 TB]
Logical block size: 4096 bytes
LU is fully provisioned
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000cca2b0955b9c
Serial number:
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Wed Sep 20 17:09:58 2023 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
Read Cache is: Enabled
Writeback Cache is: Disabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Grown defects during certification <not available>
Total blocks reassigned during format <not available>
Total new blocks reassigned <not available>
Power on minutes since format <not available>
Current Drive Temperature: 52 C
Drive Trip Temperature: 85 C
Manufactured in week 07 of year 2022
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 2
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 4
Elements in grown defect list: 0
Vendor (Seagate Cache) information
Blocks sent to initiator = 4806269730816
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 0 41824 1260.178 0
write: 0 0 0 0 257 24051.715 0
verify: 0 0 0 0 279 0.000 0
Non-medium error count: 0
Self-test execution status: 73% of test remaining
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background long Self test in progress ... - NOW - [- - -]
# 2 Background short Completed - 30 - [- - -]
Long (extended) Self-test duration: 65535 seconds [1092.2 minutes]
Background scan results log
Status: scan is active
Accumulated power on time, hours:minutes 47:01 [2821 minutes]
Number of background scans performed: 0, scan progress: 74.78%
Number of background medium scans performed: 0
Protocol Specific port log page for SAS SSP
relative target port id = 1
generation code = 2
number of phys = 1
phy identifier = 0
attached device type: SAS or SATA device
attached reason: unknown
reason: unknown
negotiated logical link rate: phy enabled; 12 Gbps
attached initiator port: ssp=1 stp=1 smp=1
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000cca2b0955b9d
attached SAS address = 0x56c92bf00046ec04
attached phy identifier = 3
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization = 0
Phy reset problem = 0
Phy event descriptors:
Invalid word count: 0
Running disparity error count: 0
Loss of dword synchronization count: 0
Phy reset problem count: 0
relative target port id = 2
generation code = 2
number of phys = 1
phy identifier = 1
attached device type: no device attached
attached reason: unknown
reason: power on
negotiated logical link rate: phy enabled; unknown
attached initiator port: ssp=0 stp=0 smp=0
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000cca2b0955b9e
attached SAS address = 0x0
attached phy identifier = 0
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization = 0
Phy reset problem = 0
Phy event descriptors:
Invalid word count: 0
Running disparity error count: 0
Loss of dword synchronization count: 0
Phy reset problem count: 0
=== START OF INFORMATION SECTION ===
Vendor: HGST
Product: HUH721212AL4205
Revision: D630
Compliance: SPC-4
User Capacity: 12,000,138,625,024 bytes [12.0 TB]
Logical block size: 4096 bytes
LU is fully provisioned
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000cca2b0954274
Serial number:
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Wed Sep 20 17:10:02 2023 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
Read Cache is: Enabled
Writeback Cache is: Disabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Grown defects during certification <not available>
Total blocks reassigned during format <not available>
Total new blocks reassigned <not available>
Power on minutes since format <not available>
Current Drive Temperature: 52 C
Drive Trip Temperature: 85 C
Manufactured in week 07 of year 2022
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 2
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 4
Elements in grown defect list: 0
Vendor (Seagate Cache) information
Blocks sent to initiator = 4736057081856
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 0 41664 1260.155 0
write: 0 0 0 0 109 24046.736 0
verify: 0 0 0 0 53 0.000 0
Non-medium error count: 0
Self-test execution status: 72% of test remaining
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background long Self test in progress ... - NOW - [- - -]
# 2 Background short Completed - 29 - [- - -]
Long (extended) Self-test duration: 65535 seconds [1092.2 minutes]
Background scan results log
Status: scan is active
Accumulated power on time, hours:minutes 46:17 [2777 minutes]
Number of background scans performed: 0, scan progress: 74.62%
Number of background medium scans performed: 0
Protocol Specific port log page for SAS SSP
relative target port id = 1
generation code = 2
number of phys = 1
phy identifier = 0
attached device type: SAS or SATA device
attached reason: unknown
reason: unknown
negotiated logical link rate: phy enabled; 12 Gbps
attached initiator port: ssp=1 stp=1 smp=1
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000cca2b0954275
attached SAS address = 0x56c92bf00046ec05
attached phy identifier = 1
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization = 0
Phy reset problem = 0
Phy event descriptors:
Invalid word count: 0
Running disparity error count: 0
Loss of dword synchronization count: 0
Phy reset problem count: 0
relative target port id = 2
generation code = 2
number of phys = 1
phy identifier = 1
attached device type: no device attached
attached reason: unknown
reason: power on
negotiated logical link rate: phy enabled; unknown
attached initiator port: ssp=0 stp=0 smp=0
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000cca2b0954276
attached SAS address = 0x0
attached phy identifier = 0
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization = 0
Phy reset problem = 0
Phy event descriptors:
Invalid word count: 0
Running disparity error count: 0
Loss of dword synchronization count: 0
Phy reset problem count: 0
=== START OF INFORMATION SECTION ===
Vendor: HGST
Product: HUH721212AL4205
Revision: D630
Compliance: SPC-4
User Capacity: 12,000,138,625,024 bytes [12.0 TB]
Logical block size: 4096 bytes
LU is fully provisioned
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000cca2b095e0f0
Serial number:
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Wed Sep 20 17:10:04 2023 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
Read Cache is: Enabled
Writeback Cache is: Disabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Grown defects during certification <not available>
Total blocks reassigned during format <not available>
Total new blocks reassigned <not available>
Power on minutes since format <not available>
Current Drive Temperature: 50 C
Drive Trip Temperature: 85 C
Manufactured in week 07 of year 2022
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 3
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 10
Elements in grown defect list: 0
Vendor (Seagate Cache) information
Blocks sent to initiator = 10974127980544
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 0 41947 1369.440 0
write: 0 0 0 0 810 24068.250 0
verify: 0 0 0 0 39 8409.547 0
Non-medium error count: 0
Self-test execution status: 73% of test remaining
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background long Self test in progress ... - NOW - [- - -]
# 2 Background short Completed - 150 - [- - -]
Long (extended) Self-test duration: 65535 seconds [1092.2 minutes]
Background scan results log
Status: scan is active
Accumulated power on time, hours:minutes 167:09 [10029 minutes]
Number of background scans performed: 1, scan progress: 74.07%
Number of background medium scans performed: 1
Protocol Specific port log page for SAS SSP
relative target port id = 1
generation code = 2
number of phys = 1
phy identifier = 0
attached device type: SAS or SATA device
attached reason: unknown
reason: unknown
negotiated logical link rate: phy enabled; 12 Gbps
attached initiator port: ssp=1 stp=1 smp=1
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000cca2b095e0f1
attached SAS address = 0x56c92bf00046ec06
attached phy identifier = 0
Invalid DWORD count = 47
Running disparity error count = 47
Loss of DWORD synchronization = 0
Phy reset problem = 0
Phy event descriptors:
Invalid word count: 47
Running disparity error count: 47
Loss of dword synchronization count: 0
Phy reset problem count: 0
relative target port id = 2
generation code = 2
number of phys = 1
phy identifier = 1
attached device type: no device attached
attached reason: unknown
reason: power on
negotiated logical link rate: phy enabled; unknown
attached initiator port: ssp=0 stp=0 smp=0
attached target port: ssp=0 stp=0 smp=0
SAS address = 0x5000cca2b095e0f2
attached SAS address = 0x0
attached phy identifier = 0
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization = 0
Phy reset problem = 0
Phy event descriptors:
Invalid word count: 0
Running disparity error count: 0
Loss of dword synchronization count: 0
Phy reset problem count: 0