Having an issue with this switch.
When I plug my device in it instantly shows
These cables are 3m (10ft) Brocade 10G-SFPP-TWX-P-0301 Compatible 10G SFP+ Passive Direct Attach Copper Twinax Cable - based off the following I thought they would work? https://cloud.kapostcontent.net/pub...b-3f9e6dd10c51/vdx-transceiver-support-matrix
When I plug the other end into a Brocade ICX6610 I get the following
sw0# show vcs
sw0# show dpod
When I plug my device in it instantly shows
Code:
sw0# 2022/09/17-09:48:20, [NSM-1042], 27922, SW/0 | Active | DCE, WARNING, sw0, Unqualified SFP transceiver for interface TenGigabitEthernet 1/0/4 is detected.
When I plug the other end into a Brocade ICX6610 I get the following
Code:
sw0# 2022/09/17-09:48:31, [NSM-1003], 27923, SW/0 | Active | DCE, INFO, sw0, Interface TenGigabitEthernet 1/0/4 is link down.
2022/09/17-09:48:34, [NSM-1001], 27924, SW/0 | Active | DCE, INFO, sw0, Interface TenGigabitEthernet 1/0/4 is online.
2022/09/17-09:48:36, [ONMD-1007], 27925, SW/0 | Active | DCE, INFO, sw0, Received First LLDP PDU on TenGigabitEthernet 1/0/4 from MAC address mac address f4e9.d449.bc83 after LLDP RX enabled or timeout.
2022/09/17-09:48:58, [ONMD-1007], 27926, SW/0 | Active | DCE, INFO, sw0, Received First LLDP PDU on TenGigabitEthernet 1/0/4 from MAC address mac address 0cc4.7a8a.d7ae after LLDP RX enabled or timeout.
sw0# show vcs
Code:
Config Mode : Local-Only
VCS Mode : Fabric Cluster
VCS ID : 1
Total Number of Nodes : 1
Rbridge-Id WWN Management IP VCS Status Fabric Status HostName
--------------------------------------------------------------------------------------------------------------
1 >10:00:50:EB:1A:75:F7:D0* 10.0.10.54 Online Online sw0
sw0# show dpod
Code:
rbridge-id: 1
48 10G ports are available in this switch
4 40G ports are available in this switch
10G Port Upgrade license is installed
40G Port Upgrade license is installed
Dynamic POD method is in use
32 10G port assignments are provisioned for use in this switch:
24 10G port assignments are provisioned by the base switch license
8 10G port assignments are provisioned by the 10G Port Upgrade license
1 10G port is assigned to installed licenses:
1 10G port is assigned to the base switch license
0 10G ports are assigned to the 10G Port Upgrade license
10G ports assigned to the base switch license:
1/0/4
10G ports assigned to the 10G Port Upgrade license:
None
10G ports not assigned to a license:
1/0/1, 1/0/2, 1/0/3, 1/0/5, 1/0/6, 1/0/7, 1/0/8, 1/0/9, 1/0/10, 1/0/11
1/0/12, 1/0/13, 1/0/14, 1/0/15, 1/0/16, 1/0/17, 1/0/18, 1/0/19, 1/0/20, 1/0/21
1/0/22, 1/0/23, 1/0/24, 1/0/25, 1/0/26, 1/0/27, 1/0/28, 1/0/29, 1/0/30, 1/0/31
1/0/32, 1/0/33, 1/0/34, 1/0/35, 1/0/36, 1/0/37, 1/0/38, 1/0/39, 1/0/40, 1/0/41
1/0/42, 1/0/43, 1/0/44, 1/0/45, 1/0/46, 1/0/47, 1/0/48
31 license reservations are still available for use by unassigned ports
2 40G port assignments are provisioned for use in this switch:
0 40G port assignments are provisioned by the base switch license
2 40G port assignments are provisioned by the 40G Port Upgrade license
0 40G ports are assigned to installed licenses:
0 40G ports are assigned to the base switch license
0 40G ports are assigned to the 40G Port Upgrade license
40G ports assigned to the base switch license:
None
40G ports assigned to the 40G Port Upgrade license:
None
40G ports not assigned to a license:
1/0/49, 1/0/50, 1/0/51, 1/0/52
2 license reservations are still available for use by unassigned ports