I’m just hoping to get some help getting my stack running, using the 2 x 40Gb ports between 2 ICX-6610-48P units.
I originally planned for 2 units, but due the having no luck getting people to ship to AUS I proceeded with 1 unit for a while, but my second has finally arrived.
My first is configured and working with all required vlans and ve and lags...etc, and I’ve updated the firmware and license on the second and configured a basic ve as part of that process.
I’ve plugged a 40Gb DAC between 1/2/1 ports on both and am trying to follow the guide linked in the first post.
None of the commands in the guide for the second unit work.
Am I right in assuming that a “normal” stack using multiple cables needs to be created first, and then the guide basically blows that config away and configures it differently... I also assume 2 cables between units are required to form a stack?
Ive tried to run the normal stack setup commands with just the one cable plugged in but nothing happens.
Any ideas where I’m going wrong? (Unless it’s just a case of set up a normal stack first with 2 cables as mentioned)
Thanks!