X9SRW-F v1.01A with v2 xeon?

Propaganda

Member
Dec 6, 2017
98
23
8
41
I can't for the life of me get v2 chips to boot on this motherboard. v1 chips seem to boot fine. Is it possible that v1.01A boards don't support v2 chips?
 
  • Wow
Reactions: ChosenElite

Yarik Dot

Active Member
Apr 13, 2015
192
90
28
45
We have no issues with that.


Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: Supermicro
Product Name: X9SRW-F
Version: 1.01A
Serial Number: ZM133S034051
Asset Tag: To be filled by O.E.M.
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To be filled by O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0



processor : 19
vendor_id : GenuineIntel
cpu family : 6
model : 62
model name : Intel(R) Xeon(R) CPU E5-2650L v2 @ 1.70GHz
stepping : 4
microcode : 0x428
cpu MHz : 1343.035
cache size : 25600 KB
physical id : 0
siblings : 20
core id : 12
cpu cores : 10
apicid : 25
initial apicid : 25
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm cpuid_fault epb pti tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms xsaveopt dtherm ida arat pln pts
vmx flags : vnmi preemption_timer posted_intr invvpid ept_x_only ept_1gb flexpriority apicv tsc_offset vtpr mtf vapic ept vpid unrestricted_guest vapic_reg vid ple
bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs itlb_multihit
bogomips : 3399.81
clflush size : 64
cache_alignment : 64
address sizes : 46 bits physical, 48 bits virtual
power management:
 

Propaganda

Member
Dec 6, 2017
98
23
8
41
Thanks for the reference point. No idea what i might be doing wrong. Tried 2 different 2600v2 chips and both show no display on boot. V1 1620 boots no issues.
 

ChosenElite

New Member
May 29, 2020
2
0
1
If I'm not mistaken the supermicro REV has to be 1.2 to be able to support the V2 Family E5-2600 Family. I had a Recent problem with the X9DRI-LN4F+ REv. 1.10 That I purchased. I ended up getting a Rev. 1.20 Motherboard and BAM! Worked like a charm.
Here is the User Manual I searched CPU and it was the 9th Find Down it says
Supports a single Intel® E5-1600/E5-2600 series processor (2011-pin, Socket R)

No mention of V2, which is very strange Supermicro doesn't have to much Info on the board revisions.
 
Last edited:

Propaganda

Member
Dec 6, 2017
98
23
8
41
The only revisions of this board I have are 1.01A and 1.02. 1.02 seem to work correctly with v2. But again i could be doing something wrong with this 1.01a board...
 

Propaganda

Member
Dec 6, 2017
98
23
8
41
So a bit of an update here. I did find this information:
FAQ Entry | Online Support | Support - Super Micro Computer, Inc.

This seems to allude to revision vs chip generation issues. I ended up ordering another X9SRW-F board from ebay which specified 1.02 revision. I got the board in and it was unfortunately a 1.01A revision. For shits and giggles I updated the board and it works correctly with v2 CPUs. Does that mean this board was modified?