Hello,
I've got a X9DR7-LN4F, Dual e5-2620, etc.
BIOS says VT-D and the like are enabled.
I'm trying to do pci passthrough so I can run VMWare on bare metal, then export my HBA's to a OI VM.
I spotted the following error in dmesg when I had VMWare installed.
0:00:00:04.621 cpu0:8192)IOMMUIntel: 5179: No DMAR ACPI location found
I am running a recent beta bios from SuperMicro to address issues I had having 2+Onboard HBA's in the system causing it to not boot (Would post, but failed scanning OPROMS)
I've seen a few users on the forum running this specific board, Have you had any luck running vmware and using vt-d on it?
I did search the VMWare forums, and came up with something about editing a vmware config file, and adding vhv_allowed = "TRUE" or something like that, tried that and no luck.
I've got a X9DR7-LN4F, Dual e5-2620, etc.
BIOS says VT-D and the like are enabled.
I'm trying to do pci passthrough so I can run VMWare on bare metal, then export my HBA's to a OI VM.
I spotted the following error in dmesg when I had VMWare installed.
0:00:00:04.621 cpu0:8192)IOMMUIntel: 5179: No DMAR ACPI location found
I am running a recent beta bios from SuperMicro to address issues I had having 2+Onboard HBA's in the system causing it to not boot (Would post, but failed scanning OPROMS)
I've seen a few users on the forum running this specific board, Have you had any luck running vmware and using vt-d on it?
I did search the VMWare forums, and came up with something about editing a vmware config file, and adding vhv_allowed = "TRUE" or something like that, tried that and no luck.
Last edited:
