X11SPL-F IPMI Question

[K D]

I have 2 identically configured systems - X11SPL-F motherboard, Xeon Gold 6134, 64 GB PC2400, 1 Intel DC P3700, 1 Crucial MX300 m.2 sata and 1 Sandisk UltraFIT usb drive in the internal header.

In the IPMI website, I see different menu options in both. One has an additional NVME Menu while the other doesnt. What is this menu for and why do I have it only in one server. I also checked in another server with the same motherboard and it doesnt have it as well. All are on the same BIOS and BMC Firmware versions.

 

[ph0ton]

Do you have an Intel DC P3700 disk in both systems, or only in one? It's PCIE based, so that explains the NVMe option.

The Crucial disk is SATA based and will be handled like a normal disk.

 

[Rand__]

CMOS reset? on either or both

 

[K D]

@ph0ton Both have the P3700

@Rand__ both have had Bios reset to defaults. I will try to reset the IPMI to defaults as well.

 

[Rand__]

No I explicitly meant CMOS reset - that should clean up any potential issues.

Had a board recently not detecting anything in the x16 slot - CMOS reset to the rescue.
Its the default recommendation from SM support as well if anything weird is going on (in my experience)

 

[K D]

I will do a hard reset across all the boards and check it out.


Sent from my iPhone using Tapatalk