X10SRi-F and setting ram to run at 2133MHz ?

[RimBlock]

Hi,

I have an X10SRi-F Supermicro board and to this I have added some Kingston KVR21R15D4/16 ram which is specc'd at 2133MHz.

On booting and entering the BIOS I see the ram reported as Micron 1866MHz ram. It is reported as running at 1866MHz with ram speed set to auto.

I have changed the speed to 2133MHz manually (i.e. turned off auto) but on reboot it is still reporting 1866MHz in the BIOS.

What setting am I missing in order to set it to 2133MHz or is it just reporting badly.

The ram was direct from the local distributor for Kingston so not concerned about non-genuine ram.

Thanks.

 

[palm101]

What CPU?

 

[T_Minus]

Are all slots filled?

 

[RimBlock]

Banks 1 & 2 are full, banks 3 & 4 have 1 sick each. Total of 6x 16GB out of 8 slots.

Cpu is a E5-2630v3.

Thanks

 

[palm101]

ARK | Intel® Xeon® Processor E5-2630 v3 (20M Cache, 2.40 GHz)

Memory type supported: DDR4 1600/1866

 

[RimBlock]

Thanks, that explains it .