[WTS][Houston, TX Local] Dell VRTX Rackmount 25xSFF, 10GbE Switch Module, Dual CMC/Expander, x4 M630 (Barebones), x1 M830 (x4 E5-4640 v4)

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.

frogtech

Well-Known Member
Jan 4, 2016
1,472
270
83
35
timestamps
  • going to make the listing as concise as possible spec-wise
  • M630s are barebones since I repurposed the compute/RAM
For Sale (all inclusive):
Dell VRTX Rackmount Enclosure /w 25xSFF Bays

  • Rackmount with Rails
  • No Storage, will include 20 shown trays
  • Dual CMC, Dual SPERC8, Dual Expander
  • R1-2210 10GbE Switch Module
  • x4 1100W PSU, x4 Blowers, x6 Fans
  • CMC Enterprise
x4 Dell M630 13G Server (Identically Configured)
  • No CPU/RAM (E5-2680v4 are very inexpensive on ebay)
  • x2 Heatsinks
  • H730 Controller / x2 SAS/SATA Backplane
  • x2 3N9XX (PCIe Passthrough v2 Mezzanine)
  • x1 Intel x520-k Dual Port 10Gb KR NDC (Network Card)
  • SD Module
  • iDRAC8 Enterprise
x1 Dell M830 13GB Server
  • x4 E5-4640 v4 CPU / No RAM
  • x4 Heatsinks
  • H730 Controller / x4 SAS/SATA Backplane
  • QLogic 57810-k Dual port 10Gb KR CNA Blade NDC (Network Card)
  • x4 3N9XX (PCIe Passthrough v2 Mezzanine)
  • iDRAC8 Enterprise
Asking $3000 $2000 $1500 $1000 for everything, local, cash only. A certified cashier's check is acceptable from a business.

To entice homelabbers if interested I believe I do have the plastic pieces to "convert" it into a standing tower, but I won't sell these separately unless this is sold first


I have 24 Dell 600GB HDDs I can throw in if you want them as I'm not using them. Everything is tested and working, no bent pins in any sockets. The M830 is installable in the VRTX if you remove the lower blade divider and yes it's a supported option/configuration. You can run x2 M630 and x1 M830 or x2 M830 blades, or x4 M630.

Feel free to send me PMs for questions. I most likely won't respond to questions about power consumption; there is information out there. It's a relatively quiet home lab in a box. It's basically storage, networking, and compute all in one platform. I just have way too much equipment right now.

This isn't reasonably shippable without damage. If you're an organization interested in having it shipped you must provide all shipping logistics as I don't have a pallet or any equipment for strapping it to one and I won't go out of my way to do any of that. I can provide measurements and a very rough weight estimate (no way I have a scale appropriate for this thing). I am able to transport it to a freight location.

Asking $3000 $2000 $1500 $1000 for everything, local, cash only. A certified cashier's check is acceptable from a business.

Cross posted on r/homelabsales.
 
Last edited:
  • Like
Reactions: marcoi and BLinux