Wow... SUPERMICRO CSE-743TQ-1200B-SQ $150 NEW!

Notice: Page may contain affiliate links for which we may earn a small commission through services like Amazon Affiliates or Skimlinks.
A

AJXCR

Active Member
Jan 20, 2017
565
96
28
36
If it's a true 13x13 then it's probably not going to happen unless you swap in a slightly smaller ATX PSU or convert to 1U style PSU's..


 
  • Like
Reactions: T_Minus
F

frogtech

Well-Known Member
Jan 4, 2016
1,496
277
83
36
Thanks for the awesome pics! Maybe I'm just dumb but those measurements don't even match E-ATX, if I'm reading this correctly(Which I doubt)it looks like 11 x 11.5" ... ??? The chassis says it supports a variety of dual LGA 2011 E-ATX boards. Thoughts/comments?
 
S

S-F

Member
Feb 9, 2011
148
5
18
That tape measure gives me a headache. It's worse than the ones that are metric on one side.
 
A

AJXCR

Active Member
Jan 20, 2017
565
96
28
36
frogtech said:
Thanks for the awesome pics! Maybe I'm just dumb but those measurements don't even match E-ATX, if I'm reading this correctly(Which I doubt)it looks like 11 x 11.5" ... ??? The chassis says it supports a variety of dual LGA 2011 E-ATX boards. Thoughts/comments?
Click to expand...
Lol no.. It's 13.56" wide and 12.72" tall...?

...Really just going to depend on the board.
 
Last edited:
  • Like
Reactions: frogtech
A

AJXCR

Active Member
Jan 20, 2017
565
96
28
36
S-F said:
That tape measure gives me a headache. It's worse than the ones that are metric on one side.
Click to expand...

What's wrong with the tape measure? Real engineers never start @0 in case the end of the ruler has been worn to some degree from use.. :)
 
  • Like
Reactions: frogtech
A

AJXCR

Active Member
Jan 20, 2017
565
96
28
36
Alright.... Just because I like you guys... Here is a cutout that is EXACTLY 13" x 13" set into the case:


Hard to see in the pic, but notice how the board slides under the power supply just slightly.. about one 850 Evo worth of height:


Might be room for minor adjustment, but after accounting for standoffs, it would be a really tight fit:
 
Last edited:
  • Like
Reactions: frogtech
F

frogtech

Well-Known Member
Jan 4, 2016
1,496
277
83
36
Yeah I don't think it would work in this chassis unfortunately, there is a pretty decent amount of extra height on the 13 x 13 boards to the left of the serial connector and I definitely think some RAM slots would not be usable. Just need to decide if 16 DIMMs is enough I guess.
 
N

nthu9280

Well-Known Member
Feb 3, 2016
1,630
505
113
San Antonio, TX
I posted NIB listings745TQ week or so ago with AMD board, CPU and some RAM. It works out to $425 or so shipped. Don't know if there is a market for that H8 board and worth the hassle to reduce the net cost.

Sent from my Nexus 6 using Tapatalk
 
You must log in or register to reply here.
Top Bottom