Hi everyone. I'm trying to install a couple of these SATA SSDs into the built in M.2 riser on a Proliant X170R node for an ESXi datastore. It works and is recognized, but after a few minutes of operation, iLO5 reports that sensor 60 (AHCI HD) reports a high temp situation and the server shuts down. I can disable that behavior but the fans still ramp up to 100%.
I happen to have an old 1TB Transcend M.2 SATA SSD and interestingly enough, that doesn't trigger a high temp alarm. Also, the original 240 Gig HPe SATA SSD (which are Micron 5300 SSDs) also work fine of course.
Anyone have a suggestion on a workaround?
I happen to have an old 1TB Transcend M.2 SATA SSD and interestingly enough, that doesn't trigger a high temp alarm. Also, the original 240 Gig HPe SATA SSD (which are Micron 5300 SSDs) also work fine of course.
Anyone have a suggestion on a workaround?