VRM modify ICC_MAX to run high TDC/TDP OEM processors

[awaitnil]

maybe they don't have green LED in stock. there is no mention of LED color in the manual.

it could be that we don't have the right connectors.

This scan result is the scan result of I2C1PWR after I turned on the power. Their data seems different from not turning on the power.

> Bus scan started. 7 bit address used. Start address = 0x10, End address = 0x7F
Slave found. 8 bit address = 0x20; 7 bit address = 0x10 Write
Slave found. 8 bit address = 0x36; 7 bit address = 0x1B Write
Slave found. 8 bit address = 0x37; 7 bit address = 0x1B Read
Slave found. 8 bit address = 0x38; 7 bit address = 0x1C Write
Slave found. 8 bit address = 0x39; 7 bit address = 0x1C Read
Slave found. 8 bit address = 0x3A; 7 bit address = 0x1D Write
Slave found. 8 bit address = 0x61; 7 bit address = 0x30 Read
Slave found. 8 bit address = 0x62; 7 bit address = 0x31 Write
Slave found. 8 bit address = 0x63; 7 bit address = 0x31 Read
Slave found. 8 bit address = 0x64; 7 bit address = 0x32 Write
Slave found. 8 bit address = 0x65; 7 bit address = 0x32 Read
Slave found. 8 bit address = 0x8E; 7 bit address = 0x47 Write
Slave found. 8 bit address = 0x8F; 7 bit address = 0x47 Read
Slave found. 8 bit address = 0x90; 7 bit address = 0x48 Write
Slave found. 8 bit address = 0x91; 7 bit address = 0x48 Read
Slave found. 8 bit address = 0x92; 7 bit address = 0x49 Write
Slave found. 8 bit address = 0x93; 7 bit address = 0x49 Read
Slave found. 8 bit address = 0xBB; 7 bit address = 0x5D Read
Slave found. 8 bit address = 0xBC; 7 bit address = 0x5E Write
Slave found. 8 bit address = 0xBD; 7 bit address = 0x5E Read
Slave found. 8 bit address = 0xBE; 7 bit address = 0x5F Write
Slave found. 8 bit address = 0xBF; 7 bit address = 0x5F Read
Slave found. 8 bit address = 0xC0; 7 bit address = 0x60 Write
Slave found. 8 bit address = 0xEA; 7 bit address = 0x75 Write
Slave found. 8 bit address = 0xEB; 7 bit address = 0x75 Read
Slave found. 8 bit address = 0xEC; 7 bit address = 0x76 Write
Slave found. 8 bit address = 0xED; 7 bit address = 0x76 Read
Slave found. 8 bit address = 0xEE; 7 bit address = 0x77 Write
Slave found. 8 bit address = 0xEF; 7 bit address = 0x77 Read
Bus scan finished

 

[awaitnil]

@RolloZ170


I am very sorry, and I also feel very sad and don't want to disturb your life. Due to helplessness, I hope you can help me check these data again. I changed the position of the yellow and blue lines and scanned them with different results.

Sir, I'm not sure if these data have any reference value. If possible, could you please help me take a look? Thank you very much. Thank you again.

The CPU feels very hot now, I think I should have succeeded. Please help me confirm, sir, that the CPU is no longer as cold and icy as before.

This is the data obtained from I2C0-PWR

G:\i2chelp\MCP2221a_VRM_mod(16042024)>MCP2221a_iccmax_FF.exe -scan 10 7f
The MCP2221a device is connected.

scanning at addr: 10
scanning at addr: 11
scanning at addr: 12
scanning at addr: 13
scanning at addr: 14
scanning at addr: 15
scanning at addr: 16
scanning at addr: 17
scanning at addr: 18
scanning at addr: 19
scanning at addr: 1A
scanning at addr: 1B
scanning at addr: 1C
scanning at addr: 1D
scanning at addr: 1E
scanning at addr: 1F
scanning at addr: 20
scanning at addr: 21
scanning at addr: 22
scanning at addr: 23
scanning at addr: 24
scanning at addr: 25
scanning at addr: 26
scanning at addr: 27
scanning at addr: 28
scanning at addr: 29
scanning at addr: 2A
scanning at addr: 2B
scanning at addr: 2C
scanning at addr: 2D
scanning at addr: 2E
scanning at addr: 2F
scanning at addr: 30
scanning at addr: 31
scanning at addr: 32
scanning at addr: 33
scanning at addr: 34
scanning at addr: 35
scanning at addr: 36
scanning at addr: 37
scanning at addr: 38
scanning at addr: 39
scanning at addr: 3A
scanning at addr: 3B
scanning at addr: 3C
scanning at addr: 3D
scanning at addr: 3E
scanning at addr: 3F
scanning at addr: 40
Primarion family controller found at addr: 40
PXE1610C found at addr: 40
remaining attempts= 0D
scanning at addr: 41
scanning at addr: 42
Primarion family controller found at addr: 42
PXE1610C found at addr: 42
remaining attempts= 0D
scanning at addr: 43
scanning at addr: 44
scanning at addr: 45
scanning at addr: 46
scanning at addr: 47
scanning at addr: 48
scanning at addr: 49
scanning at addr: 4A
scanning at addr: 4B
scanning at addr: 4C
scanning at addr: 4D
scanning at addr: 4E
scanning at addr: 4F
scanning at addr: 50
scanning at addr: 51
scanning at addr: 52
scanning at addr: 53
scanning at addr: 54
scanning at addr: 55
scanning at addr: 56
scanning at addr: 57
scanning at addr: 58
scanning at addr: 59
scanning at addr: 5A
scanning at addr: 5B
scanning at addr: 5C
scanning at addr: 5D
scanning at addr: 5E
scanning at addr: 5F
scanning at addr: 60
scanning at addr: 61
scanning at addr: 62
scanning at addr: 63
scanning at addr: 64
scanning at addr: 65
scanning at addr: 66
scanning at addr: 67
scanning at addr: 68
scanning at addr: 69
scanning at addr: 6A
scanning at addr: 6B
scanning at addr: 6C
scanning at addr: 6D
scanning at addr: 6E
scanning at addr: 6F
scanning at addr: 70
scanning at addr: 71
scanning at addr: 72
scanning at addr: 73
scanning at addr: 74
scanning at addr: 75
scanning at addr: 76
scanning at addr: 77
scanning at addr: 78
scanning at addr: 79
scanning at addr: 7A
scanning at addr: 7B
scanning at addr: 7C
scanning at addr: 7D
scanning at addr: 7E
scanning at addr: 7F
press any key.

 

[awaitnil]

@RolloZ170


I am very sorry, and I also feel very sad and don't want to disturb your life. Due to helplessness, I hope you can help me check these data again. I changed the position of the yellow and blue lines and scanned them with different results.

Sir, I'm not sure if these data have any reference value. If possible, could you please help me take a look? Thank you very much. Thank you again.

The CPU feels very hot now, I think I should have succeeded. Please help me confirm, sir, that the CPU is no longer as cold and icy as before.

This is the data obtained from I2C0-PWR

G:\i2chelp\MCP2221a_VRM_mod(16042024)>MCP2221a_iccmax_FF.exe -scan 10 7f
The MCP2221a device is connected.

scanning at addr: 10
scanning at addr: 11
scanning at addr: 12
scanning at addr: 13
scanning at addr: 14
scanning at addr: 15
scanning at addr: 16
scanning at addr: 17
scanning at addr: 18
scanning at addr: 19
scanning at addr: 1A
scanning at addr: 1B
scanning at addr: 1C
scanning at addr: 1D
scanning at addr: 1E
scanning at addr: 1F
scanning at addr: 20
scanning at addr: 21
scanning at addr: 22
scanning at addr: 23
scanning at addr: 24
scanning at addr: 25
scanning at addr: 26
scanning at addr: 27
scanning at addr: 28
scanning at addr: 29
scanning at addr: 2A
scanning at addr: 2B
scanning at addr: 2C
scanning at addr: 2D
scanning at addr: 2E
scanning at addr: 2F
scanning at addr: 30
scanning at addr: 31
scanning at addr: 32
scanning at addr: 33
scanning at addr: 34
scanning at addr: 35
scanning at addr: 36
scanning at addr: 37
scanning at addr: 38
scanning at addr: 39
scanning at addr: 3A
scanning at addr: 3B
scanning at addr: 3C
scanning at addr: 3D
scanning at addr: 3E
scanning at addr: 3F
scanning at addr: 40
Primarion family controller found at addr: 40
PXE1610C found at addr: 40
remaining attempts= 0D
scanning at addr: 41
scanning at addr: 42
Primarion family controller found at addr: 42
PXE1610C found at addr: 42
remaining attempts= 0D
scanning at addr: 43
scanning at addr: 44
scanning at addr: 45
scanning at addr: 46
scanning at addr: 47
scanning at addr: 48
scanning at addr: 49
scanning at addr: 4A
scanning at addr: 4B
scanning at addr: 4C
scanning at addr: 4D
scanning at addr: 4E
scanning at addr: 4F
scanning at addr: 50
scanning at addr: 51
scanning at addr: 52
scanning at addr: 53
scanning at addr: 54
scanning at addr: 55
scanning at addr: 56
scanning at addr: 57
scanning at addr: 58
scanning at addr: 59
scanning at addr: 5A
scanning at addr: 5B
scanning at addr: 5C
scanning at addr: 5D
scanning at addr: 5E
scanning at addr: 5F
scanning at addr: 60
scanning at addr: 61
scanning at addr: 62
scanning at addr: 63
scanning at addr: 64
scanning at addr: 65
scanning at addr: 66
scanning at addr: 67
scanning at addr: 68
scanning at addr: 69
scanning at addr: 6A
scanning at addr: 6B
scanning at addr: 6C
scanning at addr: 6D
scanning at addr: 6E
scanning at addr: 6F
scanning at addr: 70
scanning at addr: 71
scanning at addr: 72
scanning at addr: 73
scanning at addr: 74
scanning at addr: 75
scanning at addr: 76
scanning at addr: 77
scanning at addr: 78
scanning at addr: 79
scanning at addr: 7A
scanning at addr: 7B
scanning at addr: 7C
scanning at addr: 7D
scanning at addr: 7E
scanning at addr: 7F
press any key.

I followed the instructions and executed these codes, which looked cool, but I am not sure if they were successful because I do not have a monitor. VGA to HDMI conversion is invalid. I need to purchase another adapter cable for the monitor

G:\i2chelp\MCP2221a_VRM_mod(16042024)>MCP2221a_iccmax_FF.exe -PXE1610C 40 42
The MCP2221a device is connected.

ReadBlock( Page00,cmdFD,1)=B3

ReadBlock( Page4F,cmd1A,1)=00

ReadBlock( Page4F,cmd32,2)=1504

PXE1610C found: starting modd

WriteBlock( Page3F,cmd27,7C B3)
ReadBlock( Page20,cmd73,2) ICC_MAX=E800

WriteBlock( Page20,cmd73,FF 00)=OK
ReadBlock( Page20,cmd73,2) ICC_MAX=FF00

WriteBlock( Page3F,cmd29,D7 EF)=OK
WriteBlock( Page3F,cmd34)=OK
WriteBlock( Page3F,cmd29,00 00)=OK
PXE1610C modd successful

ReadBlock( Page00,cmdFD,1)=B3

ReadBlock( Page4F,cmd1A,1)=00

ReadBlock( Page4F,cmd32,2)=1504

PXE1610C found: starting modd

WriteBlock( Page3F,cmd27,7C B3)
ReadBlock( Page20,cmd73,2) ICC_MAX=E800

WriteBlock( Page20,cmd73,FF 00)=OK
ReadBlock( Page20,cmd73,2) ICC_MAX=FF00

WriteBlock( Page3F,cmd29,D7 EF)=OK
WriteBlock( Page3F,cmd34)=OK
WriteBlock( Page3F,cmd29,00 00)=OK
PXE1610C modd successful

press any key.

 

[RolloZ170]

I followed the instructions and executed these codes, which looked cool, but I am not sure if they were successful because I do not have a monitor. VGA to HDMI conversion is invalid. I need to purchase another adapter cable for the monitor

Everything's right, I'm proud of you!

this is what we want to see !

scanning at addr: 3F
scanning at addr: 40
Primarion family controller found at addr: 40
PXE1610C found at addr: 40
remaining attempts= 0D
scanning at addr: 41
scanning at addr: 42
Primarion family controller found at addr: 42
PXE1610C found at addr: 42
remaining attempts= 0D
scanning at addr: 43
scanning at addr: 44

 

[RolloZ170]

I changed the position of the yellow and blue lines and scanned them with different results.

so the pinout is different from 5270M5
5280M5 I2C0_PWR
pin1 = SCL
pin2 = SDA
pin3 = GND

 

[awaitnil]

so the pinout is different from 5270M5
5280M5 I2C0_PWR
pin1 = SCL
pin2 = SDA
pin3 = GND

I touched the CPU, and now they are very hot and hot to the touch, which is different from before. This indicates that the motherboard is supplying power to the CPU. There is a high probability of success.
I bought a VAG to HDMI cable, but the previous cable was invalid and my monitor did not respond.
I have placed a new order and purchased a VAG to HDMI cable with USB. I hope the conversion will be successful tomorrow and the monitor will light up.
Sir, thank you very much for your patient guidance. If possible, I would like to treat you to a beer. PAYPAL should be able to receive payment. Please provide your PAYPAL address and have a beer.

 

[RolloZ170]

I touched the CPU, and now they are very hot and hot to the touch, which is different from before. This indicates that the motherboard is supplying power to the CPU. There is a high probability of success.

should be normal, before/in BIOS they run all cores at base clock, energy saving is not enabled.

 

[MillionMiles]

I have placed a new order and purchased a VAG to HDMI cable with USB. I hope the conversion will be successful tomorrow and the monitor will light up.

Have an idea. If you can see the keyboard NumLock light up, maybe you can drink your beer early.

 

[awaitnil]

Have an idea. If you can see the keyboard NumLock light up, maybe you can drink your beer early.

Thank you very much for your suggestion. According to your method of testing, the Number and Caps lights on the keyboard will turn off and light up when repeatedly pressed and bounced up

 

[awaitnil]

@RolloZ170

Everything is fine and running stably. Thank you very much for your help, big brother.

 

[fieldofdisarray]

I wonder if the 8251C CPUs (which have a TDP of 240 Watts) would run in a R640 (which seems to support CPUs with a TDP of 205 Watts in the official documentation) with this mod. Obviously cooling could be an issue, but I'm still curious.

 

[RolloZ170]

I wonder if the 8251C CPUs (which have a TDP of 240 Watts) would run in a R640 (which seems to support CPUs with a TDP of 205 Watts in the official documentation) with this mod. Obviously cooling could be an issue, but I'm still curious.

there is no TDP block. only the TDC is blocked. they run with mod if you can cool them.

 

[fieldofdisarray]

there is no TDP block. only the TDC is blocked. they run with mod if you can cool them.

Glad to hear, I'm pretty sure I can make cooling work so I decided to order two of them. They should arrive on the 8th and I'll head to the DC on the 11th and attempt to get them running in the R640. Will post updates around then!