First I have two Dell N1124P-ON switches. These have 4 SFP+ 10Gb ports, 24 1000Base-T ports with 12 of those with PoE+. Both units are fully functional with no problems. These can run the ONIE software if you want; right now they just have the regular OS 6 installed. Includes rack ears. There are some scrapes and dings on both, see photos.
https://i.dell.com/sites/doccontent...ll-EMC-Networking-N1100-Series-Spec-Sheet.pdf
N1124P-ON #1,$350 SOLD:
N1124P-ON #2, $350:
Also for sale is a RUCKUS R720 AP. This supports 802.11ac Wave 2 4x4:4 with 160 MHz channel width and has a 2.5GBase-T POE port. Currently the RUCKUS Unleashed firmware is loaded. This is also fully functional with no problems. There are a couple dings in the plastic and a small crack in the corner, see photos.
https://webresources.ruckuswireless.com/datasheets/r720/ds-ruckus-r720.pdf
R720 #1,$200 SOLD:
Finally I have three RUCKUS R610 APs. These support 802.11ac Wave 2 3x3:3 with 160 MHz channel width and have a 1000Base-T PoE port. Currently the RUCKUS Unleashed firmware is loaded. These are also fully functional with no problems. The first unit is model "901-R610-US00" and the other two are "901-R610-WW00" which means "World-Wide" or unlocked frequency bands I think. I've never had any problems with frequencies or anything. Two of the units have a 3D printed top cover as the original covers were damaged. The third unit has the original cover with a few scrapes.
https://webresources.ruckuswireless.com/datasheets/r610/ds-ruckus-r610.pdf
R610 #1, $125:
R610 #2, $125:
R610 #3, $150:
Shipping within the USA is offered at actual rates from central WA, USPS or UPS. PayPal is accepted.
https://i.dell.com/sites/doccontent...ll-EMC-Networking-N1100-Series-Spec-Sheet.pdf
N1124P-ON #1,
N1124P-ON #2, $350:
Also for sale is a RUCKUS R720 AP. This supports 802.11ac Wave 2 4x4:4 with 160 MHz channel width and has a 2.5GBase-T POE port. Currently the RUCKUS Unleashed firmware is loaded. This is also fully functional with no problems. There are a couple dings in the plastic and a small crack in the corner, see photos.
https://webresources.ruckuswireless.com/datasheets/r720/ds-ruckus-r720.pdf
R720 #1,
Finally I have three RUCKUS R610 APs. These support 802.11ac Wave 2 3x3:3 with 160 MHz channel width and have a 1000Base-T PoE port. Currently the RUCKUS Unleashed firmware is loaded. These are also fully functional with no problems. The first unit is model "901-R610-US00" and the other two are "901-R610-WW00" which means "World-Wide" or unlocked frequency bands I think. I've never had any problems with frequencies or anything. Two of the units have a 3D printed top cover as the original covers were damaged. The third unit has the original cover with a few scrapes.
https://webresources.ruckuswireless.com/datasheets/r610/ds-ruckus-r610.pdf
R610 #1, $125:
R610 #2, $125:
R610 #3, $150:
Shipping within the USA is offered at actual rates from central WA, USPS or UPS. PayPal is accepted.
Attachments
Last edited:
